Jump to content
SAU Community

Recommended Posts

Made up a second catch can/windscreen washer bottle and also a power steering reservoir.

I plan on running two catch cans, one on the drivers side retuning to the PVC and to the sump and the

second on the passengers side returning to the inlet of the turbo and the sump as well.

I'll be able to hide the boost control valve and windscreen washer pump in the cavity under the tank.

IMGP2521_resize_zps0be3bd9d.jpg

IMGP2522_resize_zps5e9d7e18.jpg

IMGP2523_resize_zpsf0aa7a8d.jpg

IMGP2520_resize_zps04013510.jpg

IMGP2527_resize_zpsdada68f1.jpg

  • Like 2
  • 1 month later...

Small update, welded up the intake pipe and return from the synapse diverter valve to the intake.

Don't think I will use the air box I made.

IMGP2530_resize_zps1bd33709.jpg

Also trying to work out a bonnet hinge, going to make some in the style or R33 boot hinges.

These are just some pieces of flat bar to work out the lengths of the links and where the pivot points will be.

Should be able to make the bonnet swing up 90 deg.

IMGP2532_resize_zps55e12ca2.jpg

IMGP2531_resize_zps3276425c.jpg

IMGP2533_resize_zps1eba5a56.jpg

  • Like 2
  • 2 weeks later...
  • 1 month later...

Bit of an update, brought some wheels, crossfire D-spec 18x9.5 also brought some hardrace rear arms. Started extending the sump

and filling in the bottom of it to hopefully help oil return.

IMGP2568_resize_zps578e42e8.jpg

Little bit of stick out.

IMGP2559_resize_zps0ca0ccd2.jpg

IMGP2547_resize_zpsaf299f8c.jpg

IMGP2552_resize_zpse2da0b54.jpg

IMGP2572_resize_zps49e918ba.jpg

IMGP2576_resize_zps81be60c0.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...