Jump to content
SAU Community

Recommended Posts

probably haha

no idea then, apparently rwd stagea run s15 front suspension

More like R33 GTS-t

I can supply Whiteline caster adjustable replacement if you like; PM me.

You will need to get them pressed out/in.

It might just be that i'm tired and need to go to bed, but really ? grease leaking out of that bush ? Isn't it a pressed rubber and there would only be a smidge of grease on the part the bolt goes through ?

You sure you don't have a leak from somewhere else ?

ok sweet r34 or r33 for the adjustable radius rods? keep in mind its an rsv... afew people have told me suspension components are different, then again they could be wrong none of them own one

pm me your vin and i'll tell you the part number for the caster bushes/rods and you should be able to work out what you need from that

  • Like 1

Yep, no such thing as too much caster.

On my 180b SSS, I modified the front of the guard openings so I could get more.

---------------------------------------------------------------------------------------------------------------------------------

lol same on both cars here

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...