Jump to content
SAU Community

Recommended Posts

Hey Sau's

So over the long weekend i had picked up another GTR R32 for a good price... i thought it would be a good idea just to drive around in a std GTR until mine was finished with my court proceedings..

so after owning the car for 26hours the motor decided to let go on me :( my misses was taking it for a drive at the time when the car sounded like it let something go and just turned off..

after trying to get the car to start again i checked the oil (i know i should of checked this before) but i was planning on servicing the car the next day before driving it again.. i had notice it was low

now i have no idea what could be wrong but i assume the worst either the timing belts gone or its spun a bearing.. i know you can't tell what wrong without looking at it but i want peoples thoughts on what is the cheapest way to get this car going again as i dont want to be stuck with 2 GTR's that dont work :(

should i bother gettting it looked at or fine a replacement motor???

Link to comment
https://www.sau.com.au/forums/topic/426790-bought-myself-another-gtr-problem/
Share on other sites

what would a second hand head on a rb26 cost tho?

I've heard so many of these stories where people buy 32 gtrs and 2 weeks later theve spun bearings. There notorious for there oil pump problems and being such an old car, I would be reluctant t take the risk on one, unless it was rebuilt not to long ago...maybe that's why u got at the "bargain price" u did

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
×
×
  • Create New...