Jump to content
SAU Community

Recommended Posts

my mates done nearly the exactly the same as mine, less compression then mine, less aggressive cams and it made 180kw on 98 so that's why I was hoping for atleast 200 on e85, my engine builder is pretty positive it will make 200kw, but the proof is in the pudding!

Here is a photo of her in, heard her run for the first time today, I do have a video of it on my phone, will figure out how to get it onto here, tuning tomorrow, will try and get some video footage and decent non-phone photos sometime aswell.

34pxlbk.jpg

Dyno sheet - Mild Tune (will push it a bit later when its proven to be all well)
Engine torque is that divided by the diff ratio. 3.7 in this case
Annnd its on a hub Dyno hence the power curve "interuptions", if it was on a roller it would be smooth as silk.

208vh4y.jpg

Dyno sheet - Mild Tune (will push it a bit later when its proven to be all well)

Engine torque is that divided by the diff ratio. 3.7 in this case

Annnd its on a hub Dyno hence the power curve "interuptions", if it was on a roller it would be smooth as silk.

208vh4y.jpg

I can't read dyno sheets.. :(

Is that like 165kw?? :)

Edited by Zrobe

yeah mate 167.6 down the bottom

did end up making 170 odd by the end of the day, although I need to adjust the cam timing to get a few more revs out of her and upgrade the cat back exhaust, also tempted to get the throttle body's enlarged and sealed properly, one has a slight leak on idle causing a very minor miss, pretty sure EFI hardware will do that for me.

  • Like 1

That was just 98, E85 actually didn't make any more power but the car sounded a lot nicer, sounded smoother through the rev range aswell. which I was sort of disappointed by but in an NA build all gains are very minimal.

Not sure if this will work for most of you

https://www.facebook.com/photo.php?v=10151826649939459

Waiting for my go pro to be returned that I left at my friends place while I picked the car up so I can upload the video properly

Edited by Wayne.
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...