Jump to content
SAU Community

Recommended Posts

Easier to just use 6 or 6.5" round speakers. Otherwise, like others have said, spacers or make a new parcel shelf from 10 or 12mm MDF board. You will then need to brace/mount it to the metal and then screw the speakers to the MDF.

  • 2 weeks later...

Cheers for the feedback,

I am not running a sub but might consider a small sub in the boot with a small 100-200 Watt amp.

I did this kind of installation (on different cars) before but always had issues with noise from the alternator.

(actually running 2 amps and 6 speakers + sub)

But now with the Skyline and its battery in the boot this might not such a huge installation task.

Possibly a sub-box with an integrated amp would be ideal.

  • 3 weeks later...

I have 6x9 kickers i used 25ml mdf spacers and i just mounted them to the parcel shelf! had to take out the back seat and the rear trimming to get the parcel shelf out tho! And 6x9 don't distort maybe if you have a cheap deck!

  • 2 weeks later...

I did this recently and to be honeat it was a huge pain in the ass. I have very deep 6x9's going yo have to look at a custom parcel shelf... I only did this because I had expensive 6x9's sitting doing nothing... if u dont have them laying around dont try it. Its simply not worth it.

Having said that this is in a gtr and I had bracing and battery mounts to deal with.

It looks like a dogs brekky . But im going to use it to build a new shelf.

Only thing I would say yo anyone hell bent on it is. Be patient and measure it out to the mm the tolerances ( on my install at least) are tiny

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...