Jump to content
SAU Community

Recommended Posts

Am in the process of removing a cheap crappy alarm fitted to my R34 4 door and replacing it with a better one. Found the trigger points for the passenger doors ok and figured out how to trigger drivers door. On removing drivers door trim to check wiring i found this box wired into the mirror switch. From some research I believe it to be the module for the auto swing away mirrors. It had been disconnected but I would love to see if I could reinstate it. One side goes to the mirror switch and is plug and play. The other three wires however have me guessing. I split the box and they are marked on the circuit board as follows.

B+ (Straight 12v or Acc/On ?)

Earth (Obvious)

Sig (Trigger wire possibly?)

Its the signal wire that has me stumped. Am presuming that it was connected to the dealer/factory remote central locking to which I didnt get a remote for and was activated when you locked the doors either by key or remote. Anyone got any ideas?

post-114090-0-76317500-1372379106_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/427730-auto-swing-mirrors/
Share on other sites

Sorted. Thanks Chris. you were right in that they take their power and signal from the keyless entry module. Power from pin three and signal from pin six. At first there was nothing. Had the switch on the door in the neutral position thinking that the module overrode the switch function. Wrong it has to be switched to the out position to work. A bit of buggerising around but is now working. Hit the lock key on my remote and the mirrors swing in. Turn the ignition on and they swing out. Cool little feature with no real use here except for the novelty factor I guess.

Hand for tight street parking. Or in my case Redcliffe street parking where the idiots get within 2" of your car and destroy mirror housings.

yes. i once got back to my car with the driver side mirror facing outwards.....i was very pissed off but the person/car that did it was no longer there.

Where can I get one of these little modules? I would love for my mirrors to swing in and out automatically.

Tommy_J <<<--------- This fella had some, I bought one from him but haven't installed it yet...

Mine is a factory nissan accessory item. Read on another post that someone used a jaycar module for auto window rollup to do the same thing.

Hey man I've just been searching the forum to find it but I can't find it anywhere, would you be able to direct me in the right direction please, thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...