Jump to content
SAU Community

Recommended Posts

Hi all,

Are the brushes on the stageas alternator replaceable? Don't mind if they're part of the voltage regulator, just so long as the brushes are removable without dismantling the entire alternator.

Mine are just about worn out; every now and then I have to tap the alternator with a small hammer to get the charge light to go out.

Edited by DaveB
Link to comment
https://www.sau.com.au/forums/topic/428188-series-2-c34-alternator/
Share on other sites

Alternator gave up again tonight. Brushes don't look to be accessible without disassembling the alternator somewhat.

Has anybody tried other alternator options - M35's have higher-rated alternators, and they look similar. V35 possibly higher again. Or even good old R33/R34?

Thanks guys,

The only thing which concerns me about non-stagea-specific parts is the fittment of the body/distance from the belt and the size and grooving of the pulley - it must be pretty critical that these are the same (M35 is different)?

Bob I contacted Russman about his '33 one (the grooves are the same, and the body *looks* the same, so it's a $75+p/h chance...) Thanks for spotting that :)

http://www.jasoceania.com.au/PDF%20File/units%20cat%202009-2010/Alternator%20Hitachi%20Reman.pdf

just found the one i got, its remanufactured, meaning cleaned up with new regs and such. its ARJ036. its been fine on my rs260.

im pretty sure the alternators are the same. I remember researching it ages ago and that apparently over the life of the rb25/26 Nissan has used like 6 different models of alternators from different suppliers. all have same dimensions/pulleys/amps. and that's when I found the rb 20 and rb30 also have the same just older. however note that the commodore rb30 alternator is different to the skyline rb30. as for the starter I just googled around on the day that it conked out and found people using the rb30 starter on various rb25/26 engine and gearbox setups

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...