Jump to content
SAU Community

Recommended Posts

Have to run ATM but will look into those later .

Firstly I looked at the Michelin timeline and came across a recent development in the pilot tyre range . Its called Pilot A/S (all season) 3 and it became available in late 2012 and after the Pilot super sport - and available OS in 255/40/17 .

I started reading this review which looks interesting but ran out of time .

http://forums.corvetteforum.com/wheels-and-tires/3190984-my-review-of-the-michelin-pilot-sport-a-s-3-tire.html

Might see if I can get a pair sent over and throw them on for a try , if these are almost as good as PSS and work over a greater ambient temperature range they look good . Probably too soon to know how well they wear compared to PS2 PS3 and PSS but being an all season rather than a maximium performance summer tyre maybe longer life .

More later , cheers Adrian .

 

Its called Pilot A/S (all season) 3 and it became available in late 2012 and after the Pilot super sport - and available OS in 255/40/17 .

I started reading this review which looks interesting but ran out of time .

http://forums.corvetteforum.com/wheels-and-tires/3190984-my-review-of-the-michelin-pilot-sport-a-s-3-tire.html

Might see if I can get a pair sent over and throw them on for a try , if these are almost as good as PSS and work over a greater ambient temperature range they look good . Probably too soon to know how well they wear compared to PS2 PS3 and PSS but being an all season rather than a maximium performance summer tyre maybe longer life .

More later , cheers Adrian .

 

They have a UTQG of 500. Methinks they will be made of inductrial grade asbestos compared to the 180-200 wear rating tyres most people are using. Should stick like olive oil to teflon.

I haven't read the rest of the above linked review but one person said that it took some pushing to make his car drift and it hung on almost as well as Pilot Super Sports do and they feel pretty good on my car . Not sure what the wear rating on PSSs are . Remember I want better life than the PSSs gave and going a little wider can't hurt . I've had 235 and 245 so I want to give 255s a go and prefer Michelin .

A .

I used michelin pilot sport 2's fod years. There a good allrounder for street and a bit of track work. But I found they always would wear out to quick. I'm considering a tyre change with good good grip and a reasonable price. Any suggestions.???

I got over 60,000kms and 5 years 0ut of my ku31 kumhos, they're due for a change but still holding on with about a mm off the wear markers..you don't also have to spend big brand for good tyres...

ThOugh that said kumhos were alot cheaper when I bought them, prices seem to have risen considerably

I got over 60,000kms and 5 years 0ut of my ku31 kumhos, they're due for a change but still holding on with about a mm off the wear markers..you don't also have to spend big brand for good tyres...

ThOugh that said kumhos were alot cheaper when I bought them, prices seem to have risen considerably

Don't know why people keep bagging KU31s out, they are an awesome tyre for the price. I will happily run them on my GT-R, have before. They shame more expensive tyres. You can still get them cheap (e.g. tempe, ozzy).

Dunlop Sport Max TT (there are 3 sport max models, I got the middle one).

Fronts (235/45/17) are almost finished after 50,000km. Rears (255/40/17) lasted about 35,000km and I got another set. Still haven't figured out why the rears wore out first :whistling:

These are great, they maintain their grip levels right to the very end and last well too if you don't abuse them. They're expensive but you get what you pay for. I think skimping on tyres on a peformance car is retarded. If you want economy go buy a hyundai.

I had RE001's previously on my stock rims but they went hard when half worn and were dangerous in the wet. I then kept them as Texi tyres and they lasted several texis before getting down to the belts, took ages to kill them. Way too hard for a road tyre.

FWIW, a good competitor to the Dunlops mentioned above is the Goodyear Eagle F1 Asymmetric 2. In 235/45/17 they are currently available at tirerack for US$95 each, plus $US270 odd for shipping to Australia. Works out <$200 each for 2011 manufactured tyres (ie, not too old by a long shot). Dunno about other sizes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...