Jump to content
SAU Community

Recommended Posts

Have to run ATM but will look into those later .

Firstly I looked at the Michelin timeline and came across a recent development in the pilot tyre range . Its called Pilot A/S (all season) 3 and it became available in late 2012 and after the Pilot super sport - and available OS in 255/40/17 .

I started reading this review which looks interesting but ran out of time .

http://forums.corvetteforum.com/wheels-and-tires/3190984-my-review-of-the-michelin-pilot-sport-a-s-3-tire.html

Might see if I can get a pair sent over and throw them on for a try , if these are almost as good as PSS and work over a greater ambient temperature range they look good . Probably too soon to know how well they wear compared to PS2 PS3 and PSS but being an all season rather than a maximium performance summer tyre maybe longer life .

More later , cheers Adrian .

 

Its called Pilot A/S (all season) 3 and it became available in late 2012 and after the Pilot super sport - and available OS in 255/40/17 .

I started reading this review which looks interesting but ran out of time .

http://forums.corvetteforum.com/wheels-and-tires/3190984-my-review-of-the-michelin-pilot-sport-a-s-3-tire.html

Might see if I can get a pair sent over and throw them on for a try , if these are almost as good as PSS and work over a greater ambient temperature range they look good . Probably too soon to know how well they wear compared to PS2 PS3 and PSS but being an all season rather than a maximium performance summer tyre maybe longer life .

More later , cheers Adrian .

 

They have a UTQG of 500. Methinks they will be made of inductrial grade asbestos compared to the 180-200 wear rating tyres most people are using. Should stick like olive oil to teflon.

I haven't read the rest of the above linked review but one person said that it took some pushing to make his car drift and it hung on almost as well as Pilot Super Sports do and they feel pretty good on my car . Not sure what the wear rating on PSSs are . Remember I want better life than the PSSs gave and going a little wider can't hurt . I've had 235 and 245 so I want to give 255s a go and prefer Michelin .

A .

I used michelin pilot sport 2's fod years. There a good allrounder for street and a bit of track work. But I found they always would wear out to quick. I'm considering a tyre change with good good grip and a reasonable price. Any suggestions.???

I got over 60,000kms and 5 years 0ut of my ku31 kumhos, they're due for a change but still holding on with about a mm off the wear markers..you don't also have to spend big brand for good tyres...

ThOugh that said kumhos were alot cheaper when I bought them, prices seem to have risen considerably

I got over 60,000kms and 5 years 0ut of my ku31 kumhos, they're due for a change but still holding on with about a mm off the wear markers..you don't also have to spend big brand for good tyres...

ThOugh that said kumhos were alot cheaper when I bought them, prices seem to have risen considerably

Don't know why people keep bagging KU31s out, they are an awesome tyre for the price. I will happily run them on my GT-R, have before. They shame more expensive tyres. You can still get them cheap (e.g. tempe, ozzy).

Dunlop Sport Max TT (there are 3 sport max models, I got the middle one).

Fronts (235/45/17) are almost finished after 50,000km. Rears (255/40/17) lasted about 35,000km and I got another set. Still haven't figured out why the rears wore out first :whistling:

These are great, they maintain their grip levels right to the very end and last well too if you don't abuse them. They're expensive but you get what you pay for. I think skimping on tyres on a peformance car is retarded. If you want economy go buy a hyundai.

I had RE001's previously on my stock rims but they went hard when half worn and were dangerous in the wet. I then kept them as Texi tyres and they lasted several texis before getting down to the belts, took ages to kill them. Way too hard for a road tyre.

FWIW, a good competitor to the Dunlops mentioned above is the Goodyear Eagle F1 Asymmetric 2. In 235/45/17 they are currently available at tirerack for US$95 each, plus $US270 odd for shipping to Australia. Works out <$200 each for 2011 manufactured tyres (ie, not too old by a long shot). Dunno about other sizes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...