Jump to content
SAU Community

Recommended Posts

So, in all likeliness I shall be selling my R34 GTV.

I got rear ended on Manningham Rd on the way to Doncaster by a 96 pathfinder (i think it looks to small to be a patrol).

Left most of the rear end crushed. Bootlid, both lights (one looks ok but isn't working), rear bar obviously, through the reo and into the rear panel, exhaust looks like it has shifted a bit too.

To top it all off, he's uninsured, and my 3rd party only covers me for $3k.

SO! I think it's time to sell for me.

It doesn't look like it'll be ridden off, so whoever buys it won't have to worry about getting it checked out before putting it back on the road.

Has ~80-90k on the clock. 2001. And the gearbox is stuffed, auto, shifting like a horse kick occasionally, been having that problem for a while and haven't been able to fix it after spending some money with a "transmission specialist".

What I want is just ideas on how much people think it'd be worth in that condition. Obviously it still actually drives, but it wouldn't be roadworthy.

I was thinking about the $8k mark.

Thanks, and with terrible regret,

Teiresias.

Link to comment
https://www.sau.com.au/forums/topic/428540-end-of-a-short-era/
Share on other sites

No way you'll get $8k for your 'bent' 34 especially when people are selling undamaged auto turbo 34 at this price.

You might get couple of grand at most. Or wreck it out, you might get more $ that way.

No way you'll get $8k for your 'bent' 34 especially when people are selling undamaged auto turbo 34 at this price.

You might get couple of grand at most. Or wreck it out, you might get more $ that way.

Uhh... The series two GTVs tend to be more expensive then most of the 25GT-Ts you see around... Sure $8k might be shooting too high but when it wasn't 'bent' it was worth around the $14k mark.

Unfortunately there's none on carsales at the moment to get a starting full price from :-/

In the end of the day, it's only a N/A auto and no way I'd pay 'p-plater tax' these n/a imports are commanding let alone bent one.

You're better off parting it out, there is money to be had on brakes, LSD, and probably other bits (depending on how modified yours are).

Buying it at 8k and pay a few thousands to fix it, you can probably get a manual GTV for that much lol :S

Not to mention the gearbox is stuffed?...

Ok, $7k then? No reason you couldn't drop a manual box into it and they're at around the $250 mark last time I checked (second hand ofc)

8K?! You should team up with the guy selling the 17" tommy kaira wheels

Dude the only GTV on carsales is $17k, now I think that's at least $3k over realistic. Now lets say a GTV worth $14k - ~$6K worth of damage on the rear end (waiting on what the panel beater says exactly) and the gealbox -$1k, $7k doesn't seem unreasonable.

Dude the only GTV on carsales is $17k, now I think that's at least $3k over realistic. Now lets say a GTV worth $14k - ~$6K worth of damage on the rear end (waiting on what the panel beater says exactly) and the gealbox -$1k, $7k doesn't seem unreasonable.

Yes it does.

Why would you spend 14k on purchasing and repairing a stuffed one when you can buy a complete one for the same amount, without the headaches?

You will not get $7k for a crashed na auto 34. There is no need to be upset

Part it out and you'll decent get cash for it. It's the best option. I understand your dismay at your car being crushed and then people coming and telling you it isn't worth much. Unfortunately your vehicle, while it may be a gtv, is automatic and non turbo. This is not an ideal vehicle for people who have 14k to spend.

Goodluck with your sale

  • Like 1

Yea. Sorry. Bit frustrated with it all. Work has cut my hours to something like 3 hours a fortnight and this bastard just has to come along and seal the deal.

By the sound of it all it's not even worth selling it, but repairing it instead. I'm reluctant to do so, I don't even know if I'll get anything off this son of a bitch but yea.

Just out of curiosity, since this guy isn't insured and I'm assuming you have all the details and he's not a complete a$$hole, why is he not fixing what he has damaged?

If he doesn't want to pay, you have all the legal bits to go through, however I'm fairly sure in Victoria if you're hit up the backside in safe driving conditions it's the other driver's fault. Were you doing something you shouldn't have? Forced your way into another lane and stopped suddenly or something?

If that's the case and it's your fault fair enough with what you're doing, but otherwise I'd be going and getting a few quotes to fix the car from reputable workshops and hand him one that's reasonable and tell him to pay for repairs - then sell your car if you've had enough.

Also, as others have said, not worth 7-8k regardless in current state, once a car has had a decent hit and you're suggesting the rear end may be somewhat twisted, even if you fix it up to how it was, it has that history, more chances of weak spots, welding replacement body parts on possibly, not driving straight, doors being a bit harder to open/close, etc.

Good luck with it, do feel for ya.

Just out of curiosity, since this guy isn't insured and I'm assuming you have all the details and he's not a complete a$$hole, why is he not fixing what he has damaged?

If he doesn't want to pay, you have all the legal bits to go through, however I'm fairly sure in Victoria if you're hit up the backside in safe driving conditions it's the other driver's fault. Were you doing something you shouldn't have? Forced your way into another lane and stopped suddenly or something?

If that's the case and it's your fault fair enough with what you're doing, but otherwise I'd be going and getting a few quotes to fix the car from reputable workshops and hand him one that's reasonable and tell him to pay for repairs - then sell your car if you've had enough.

Also, as others have said, not worth 7-8k regardless in current state, once a car has had a decent hit and you're suggesting the rear end may be somewhat twisted, even if you fix it up to how it was, it has that history, more chances of weak spots, welding replacement body parts on possibly, not driving straight, doors being a bit harder to open/close, etc.

Good luck with it, do feel for ya.

It's 100% his fault, I was slowing down as there was an accident on the other side of the intersection, I had almost come to a stop at the lights, but took my time slowing down, it was a good 5 seconds after I was slowing that he hit me, hadn't even indicated yet to go into another lane.

Yea he gave me his ID, but I'm actually suspicious of it all, his name on the license is different to the name he gave me when he got out of the car, and the name of the email address he gave me. Also he is on his Ps (according to the license he gave me) and didn't have plates up.

So I'm a bit concerned and preparing for the worst. Brought it to the panel beaters yesterday so I'll find out early next week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
    • Ahh. Well the block damage is a problem, you really need to run a tap or thread chaser through it to see if the threads can be saved, but any chips are likely to be bottom end bound which is bad. Earls seem to have what you need if you want to stick with mounting direct on the block: https://rceperformance.com.au/parts/earls-straight-adapter-1-8-npt-male-to-1-8-bspt-female.html, but as I said above I'd recommend remote mounting the sender
    • I'm not quite understanding or I'm missing steps here, (I appreciate people are trying to inform my brain but I am of the dumb, especially today) - All I want to do is mount the male BSPT of the OEM sender into the system somewhere without it snapping the adapter via vibration. The Nissan sender has a male 1/8 BSPT output. The block has a (very destroyed) 1/8 NPT input. I'm not really sure how a lathe assists with that, and also don't know anybody with a lathe, nor specifically what I would want to buy. I'm not really sure how adding additional adapters creates a better, more leak proof resilient seal here.
×
×
  • Create New...