Jump to content
SAU Community

Recommended Posts

Tim, the big difference btw Adrian (2rismo) and myself is that Adrian can drive!

Yeah I know Adrian, woeful indeed mate. I'll give your 6krpm tip a go. I usually drop it at ~3-4k. It seems like I'll never crack the 2.0 mark let alone a 1.6, but practice makes perfect :)

I feel for you Matty. Bloody cars hey. Good to hear it's all fixed now. Oh yeah... thanks for making me feel much better about my 60's on 275/40/17 Nittos, with a 2.8 you make Chapman's 60's look good :)

Thanks Mark, and double thanks for the photo mate! You bloody ripper, photographic evidence that I CAN actually smoke 'em up!!!

Thanks for the pics Andy.

You'll get there matt, the mph indicates low 11's once you get it to hook up properly.All in time you'll pull the times it's capable of.

Best time and new P.b was 11.3 @ 121mph, i know it's not a Skyline, but it's RB powered!!

Practice makes perfect as they say!!

Adam_PSI-VL

Also, the margin between spinning off the line too much and bogging gets a lot closer with Nittos. I tend to over cook them if I leave the line with too many revs and run 1.8 60's.

They REALLY REALLY need a good cooking though dude. Badly.

Adrian

damm, intercooler pipe:(   fixed now and ready for the next wednesday night meeting. my best (if you can call it that) time for the day was 14.020  at 103.65mph. 60ft was a poor 2.8. have to get used to the nittos

Well done Matt and Chapman

Look at it this way Matt, they say every tenth on your 60' is worth two tenths at the other end, so even with a 2.2 60' you're looking at 12's.

Must find the positive!

I didn't see Keir out there Tim. I know he ran on the 30th of May (practice day). I dunno what times he got though?

The GT Autosound S15 ran on the 30th too. It went 9.3 @ mid 140's! I think Martin said the engine when bang again though ;)

Carol (from fullboost.com.au) took this awesome launch pic of the GT AS S15 -

air_04_05_025b.jpg

Thats farking nuts!

It's a bloody awesome shot hey Steve! It certainly hauls ass of the line. They were running a 150 shot of gas on it.

I just remembered! Martin was telling me that they had a bloody injector clip come off. This caused that cylinder to run lean (as expected with no power to the injector!) and it popped ;) The lack of fuel when running nitrous is a surefire piston killer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...