Jump to content
SAU Community

Recommended Posts

Hey Guys

My wife has recently got a v35

I am currently looking at some new wheels for it. With the big gaurds im looking for some wheels that fill the gaurds out and will sit just outside the gaurds.

what wheel and what offset do people run??

Help wuould be great.

Kris =)

Link to comment
https://www.sau.com.au/forums/topic/428750-need-help-with-wheels/
Share on other sites

the factory coupe 18s sit about flush with the guard on the rear of a sedan, and just inside the guard on the front, 18x8 +30. I had to roll the rear guards just a little as they were just touching the tyre after fitting 350z springs and having the alignment set to factory spec. (245/45 tyres)

SSR rims designed by veilside

Need to be reasonably low other wise these kind of sizes would poke bad

Dont ruin a car like these with cheap shit rota's when something decent isnt a lot more

whole car for reference,

19x9-11 215/35/19 and 19x10.5-3 245/35/19

Coils maxed out low

Rears guards rolled, fronts untouched

20130411_134453_zps31920668.jpg

20130406_144301_zps3cb4dcf1.jpg

20130411_134446_zps2fdc84da.jpg

  • 2 weeks later...

Finally got the wheels fitted on the wifes v35.

Went with the rota D2 EcEX and we painted centres candy purple as its the colour of her old 180sx.

Went 18 x 9.5 + 15 all round. Had to use slip on spacers as the front hit the brembos.

Fit very nice. Will out pics up tomorrow :)

Cheers for all the help guys

Edited by SNEEZYC34

Meister copies :(Shame when you can gt the 3 piece ones in any specs for relatively cheap

Well not really. These were only $1000 delivered. Cant afford meisters at the moment when we have a morgage etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...