Jump to content
SAU Community

Recommended Posts

Yeah well I want 400hp with a safe tune but didnt get anywhere near that so il put injectors and afm and take it to a different tuner

Probably also replace that turbo, cos that's gonna be utter junk at 400rwhp, IF it gets there. 5500rpm full boost lol.

Link to comment
https://www.sau.com.au/forums/topic/428864-330rwhp/page/2/#findComment-6934757
Share on other sites

Yes this ^ ^ ^ ^

I make the same power you have at the moment with full boost of 18psi around 3200rpm, Just to show you how much of a mismatched combo that turbo is for the power you want.

Go look in the hypergear thread or the RB25 turbo results thread to find a better turbo more suited to the power you want.

Link to comment
https://www.sau.com.au/forums/topic/428864-330rwhp/page/2/#findComment-6934768
Share on other sites

Bleh, I'm always hijacking threads :/

RB20DET

Stock injectors + T04e (yes laggy already I know)

171kw.. Also bad tuner.

I have 550cc injectors about to go in + better tune, will I see any benefit?

P.S.

Still saving for an SS1.5 from hypergear.

Edited by Zrobe
Link to comment
https://www.sau.com.au/forums/topic/428864-330rwhp/page/2/#findComment-6934804
Share on other sites

Bleh, I'm always hijacking threads :/

RB20DET

Stock injectors + T04e (yes laggy already I know)

171kw.. Also bad tuner.

I have 550cc injectors about to go in + better tune, will I see any benefit?

P.S.

Still saving for an SS1.5 from hypergear.

Save your money and buy the Hypergear turbo, then retune.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/428864-330rwhp/page/2/#findComment-6934810
Share on other sites

Regardless of which turbo you use to reach your power goal, you will need to replace your injectors and AFM anyway, so I would buy them first before considering selling and replacing your turbo.

Do that first and see whether you can get the power and response your after by increasing the boost pressure also.

At 16psi for a big turbo, you won't be maximising it's abilities. I'd say at a minimum, boost it up. Your low boost setting say 16psi and a highboost setting of 20.

As hypergear has mentioned, you'll be making a lot of power.

Link to comment
https://www.sau.com.au/forums/topic/428864-330rwhp/page/2/#findComment-6936846
Share on other sites

Courto, it may be possible your tuner is quite aware your injectors and AFM are limiting factors to the power you require. Knowing you have limited experience he just pegged the power at 330hp so you wouldn't blame him for the very quick death your car would have otherwise. Just for fun you could get 1,000 injectors, AFM & remove any restrictions in the exhaust, then go for it.

If the turbo is crap you will soon find out (with a reputable tuner) so just flog it off to the bin and get a 3076 and enjoy. By the way, if your tuner cannot explain to you in plain English why your combination doesn't perform it is probably because, like most mechanics, that he failed English at school and quite possibly every other subject. Find a tuner who actually enjoys educating people and knows the value of good service regardless of your own skill level.

That said, CRAP, that's a big turbo.

Link to comment
https://www.sau.com.au/forums/topic/428864-330rwhp/page/2/#findComment-6937078
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...