Jump to content
SAU Community

Recommended Posts

My car produces a clicking or clunking noise whenever i change gears or take off from idle, if you take off very slowly you can't hear it but if you take off quicker you can hear it. Its coming from the rear end of the car, and its R33 series 1. Any help or advice appreciated. What could be the problem, has anyone else experienced this? Thanks.

Universal joint - it's a join that will move in "any" direction, and still maintain a solid connection. On a tailshaft, it's the bit that connects the shaft to the diff. As the diff can move (well, in non-IRS cars anyway) and so can the gearbox etc, the join must be flexible.

No doubt someone will have a pic floating around.

guys i had the same problem too.. when to two suspension specialists and still couldnt find anything wrong.. so i did a bit of investigating my self and found it to be my wires in the boot coming out of my subs and knocking against the body of my car.. i also found a pen in there as well as some screws lol... probably isnt the problem but worth having a look..?!?!

I have been to two different places to try and find the source of the clicking noise coming from the right rear of my car. Noone has been able to find it.

To a certain extent the car has always made the noise, and i have had the car for 4 years. Its nto the diff, fluids have been changed many times with no change, its not the uni joint as they have been inspected and found to be in better condition then aother cars in the workshop, and not susp as all my susp has been changed at on etime or another.... so i am at a loss to find the source of the clicking noise....oh and not lieky to be tools etc, as the time when it is easiest to hear is when pulling out of the pits with the concrete wall on the outside and the clicking noise reverberates off the pit wall, plus all the boot trim, spare wheel, jack etc is removed.

It could be anything, including the things i have listed as not being the source of the problem, only i couldnt be bothered throwing money at it when noone knows what it is....if you know the answer you could be the only one in the counthry that has fixed the prob. :(

Its one of those probs that haunts me :(

does it do it everytime you take off? could be just the brake pads moving on the pins, have similar click when i suddenly jump on the breaks... or the handbrake pads moving off...

just a thought

That noise will more than likely be driveline backlash. Not a major problem, just annoying. You can usually avoid making the noise with practice, and by being a bit smoother. And yes, you can do it with a button clutch :D

I suffer "driveline backlash" - when I push the clutch in suddenly - eg i was reversing out of a carpark and someone ran behind me - i get a loud clunking sort of noise. It feels painful for the driveline, what is suffering? Uni joints, diff?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...