Jump to content
SAU Community

Recommended Posts

If its 1pm lunch, we might have to look at booking a number / letting trackside know

Also, going to take at least 1.5 hrs to get to Gosford from lane cove I think, on a Sunday.

If its this is a 100% go ahead I'm going to need numbers so I can ring terry/bec and make sure we have seating.

yep this is it!!! there's enough time for everyone to organise themselves and get their cars ready :)

whats the addy for the meet Craig ?

Let me confirm 100% on Lane cove. I need to alert all the tenants.

I've also contacted terry about the restaurant....got to sort out confirmed numbers.

Watch this space for more info.

https://www.facebook.com/events/214480932044402/ for anyone I don't have on F.B try this link......... here you can get familiar with the cruise route if your not from the area https://maps.google.com.au/maps/ms?authuser=0&vps=7&gl=au&ie=UTF8&hl=en&oe=UTF8&msa=0&msid=213771558366632026141.0004e3e460190cac06899

So the address is 1 chaplin drive Lancove west?

The lane cove meeting point is now approved.

So the start point is 1 Chaplin Drive Lane Cove West.

Please note that any stupid driving will be reported to the police and I will kick you off the property.

I'll start working on the numbers for the booking for lunch now. I was thinking to ensure numbers it would be a good idea to take a small deposit of $10 per person for those that will be having lunch there.....naturally you'll get that deducted from your lunch but it will be non refundable. Others can come and pay on the day but it will be in the lap of the gods as to wether there will be spare seating available.

Thoughts

Edited by Jetwreck

The lane cove meeting point is now approved.

So the start point is 1 Chaplin Drive Lane Cove West.

Please note that any stupid driving will be reported to the police and I will kick you off the property.

I'll start working on the numbers for the booking for lunch now. I was thinking to ensure numbers it would be a good idea to take a small deposit of $10 per person for those that will be having lunch there.....naturally you'll get that deducted from your lunch but it will be non refundable. Others can come and pay on the day but it will be in the lap of the gods as to wether there will be spare seating available.

Thoughts

Yep, post up some bank details.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...