Jump to content
SAU Community

Recommended Posts

Hello forum members, got this idea from a few SAU members on the last cruise I made to megalong (thanks), since the last cruise turned out great and a few sau'ers came along I thought i would post it up here again.... so here it is....

What: MCM - Sydney to Robertson Pie Shop Cruise

When: Sunday 8th of September 2013

Meet Up: KFC Carpark - Casula Home Depot Centre Crossroads - Camden Valley Way

Meet Time: 9:30am

Leave Time: 10:30am

Bring the Following - UHF Radio (will be on channel 16) - Full tank of fuel - good attitude and happy smiles - cameras and go pros - money for pie shop

Route: We will meet up at the KFC car park in Casula off Camden valley way. We will then head down the hume highway till we then come up to Picton Road, we will follow that through to the Mount Keira Pass (few twist and turns here). we will then turn onto the F6 Freeway aka Princess Hwy and follow that down to the Illawarra Hwy through the Macquarie pass (this is where the fun begins lots of twist and turns) we then arrive at the Robertsons Pie Shop at the end of our destination.

Rules for this cruise: As with any cruise, no hooning, no burnouts and no wreckless behavior. Please behave on the day as we don't the boys in blue to show up or for anyone to loose their license or car smashed on the day.

As before there will be other various forums coming aswell....

map
http://goo.gl/maps/8APxU
Please ignore the path on picton road as this map bypasses Mount Keira Pass, but we will be taking the picton road - Mount Keira Pass


Who's Going

1 sleek3 - C34 Nissan Stagea Dayz RS4
2 twenty-B - Mazda 3 MPS - Ausrotary
3 4tune - S13 - MCM
4 Daniel - K24A EK civic
5 Harley - Golf R
6 Brent - AE86 4age turbo
7 alex - s14
8 nathan - evo 8 MR
9 Ben - SAAB 9-3 turbo
10 Kingtube69 - ae92 20v / lancer - MCM
11 FullySik - Opel Astra - MCM
12 chrisj92 - Liberty RS turbo - MCM
13
14
15
16
17
18
19
20

TIME OF MEET AND DEPARTURE CHANGED - MEET 9:00AM LEAVE 9:30AM

Hello forum members, got this idea from a few SAU members on the last cruise I made to megalong (thanks), since the last cruise turned out great and a few sau'ers came along I thought i would post it up here again.... so here it is....

What: MCM - Sydney to Robertson Pie Shop Cruise

When: Sunday 8th of September 2013

Meet Up: KFC Carpark - Casula Home Depot Centre Crossroads - Camden Valley Way

Meet Time: 9:30am

Leave Time: 10:30am

Bring the Following - UHF Radio (will be on channel 16) - Full tank of fuel - good attitude and happy smiles - cameras and go pros - money for pie shop

Route: We will meet up at the KFC car park in Casula off Camden valley way. We will then head down the hume highway till we then come up to Picton Road, we will follow that through to the Mount Keira Pass (few twist and turns here). we will then turn onto the F6 Freeway aka Princess Hwy and follow that down to the Illawarra Hwy through the Macquarie pass (this is where the fun begins lots of twist and turns) we then arrive at the Robertsons Pie Shop at the end of our destination.

Rules for this cruise: As with any cruise, no hooning, no burnouts and no wreckless behavior. Please behave on the day as we don't the boys in blue to show up or for anyone to loose their license or car smashed on the day.

As before there will be other various forums coming aswell....

map
http://goo.gl/maps/8APxU
Please ignore the path on picton road as this map bypasses Mount Keira Pass, but we will be taking the picton road - Mount Keira Pass


Who's Going

1 sleek3 - C34 Nissan Stagea Dayz RS4
2 twenty-B - Mazda 3 MPS - Ausrotary
3 4tune - S13 - MCM
4 Daniel - K24A EK civic
5 Harley - Golf R
6 Brent - AE86 4age turbo
7 alex - s14
8 nathan - evo 8 MR
9 Ben - SAAB 9-3 turbo
10 Kingtube69 - ae92 20v / lancer - MCM
11 FullySik - Opel Astra - MCM
12 chrisj92 - Liberty RS turbo - MCM
13
14
15
16
17
18
19
20

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...