Jump to content
SAU Community

Recommended Posts

As I was driving home last night the car started doin. Some weird things :/ best way to explain it was the car went dead felt like it was about to stall couldn't accelerate at all wasn't miss firing was just going dead anyone got any idea wat it could be ? I was thinking coil packs ? Maybe afm ?

Pretty hard to tell without an accurate description... But yes it sounds like your coilpacks. If they are still OEM and done over 100k kms, with a little bit of moisture they tend to f**k out. When mine went, I had just washed my car, drove fine until I tried to give it shit, then it felt almost like boost cut, no power at all.

If it was doing it all the time, check your fuel pump/filter. Maybe you were starving it of fuel.

Yeah they are standard coil packs it was real strange tho wasn't a misfire it was like it was a complete dead spot when I I pressed the accelerator it was like the car was off no miss nothing just a dead spot

So was it just a certain point in the power band or it just wouldn't accellerate at all ever? Or would it drive normally if you babyed it, and only 'died' when you tried to rev it a bit?

Yeah they are standard coil packs it was real strange tho wasn't a misfire it was like it was a complete dead spot when I I pressed the accelerator it was like the car was off no miss nothing just a dead spot

Alternator should provide all the voltage needed while car is running. Technically you could remove a battery once the car is started and not notice anything.

Check the links at the battery terminal

Maybe cam or crank angle sensor?

My vy did the same thing, only the engine stopped completely and I had to restart the car. No noise, no splutter - just died.

Turned out to be the distribution module underneath the coilpacks, which got the signal from the crank angle.

Edited by voncina

Alternator should provide all the voltage needed while car is running. Technically you could remove a battery once the car is started and not notice anything.

There's a link for ECU there, pull that out and the engine will shut off. Happened to me on my R31 and R32. Don't know about the newer cars.

Yes you can pull the battery out, just remember where the alternator wire connects to.

Sorry, I wasn't aware of that wire. Disregard me then.

There's a link for ECU there, pull that out and the engine will shut off. Happened to me on my R31 and R32. Don't know about the newer cars.

Yes you can pull the battery out, just remember where the alternator wire connects to.

Sounds the same as what mine is doing. Completely cuts out, like it cuts the ignition, could pump the throttle and nothing. Then it comes back running perfect like it never happened.

thats exactly wat its doing... i started it yesterday and it didnt miss a beat i have no idea what it could be :/ anyone have any ideas? could it be a an airflow meter ? coilpack?

same thing happend to mine , was the AFM. I swapped it over with a working one and has run fine ever since. I would start with the cheapest and easiest options first then move on to the harder and more expensive items.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...