Jump to content
SAU Community

Recommended Posts

As I was driving home last night the car started doin. Some weird things :/ best way to explain it was the car went dead felt like it was about to stall couldn't accelerate at all wasn't miss firing was just going dead anyone got any idea wat it could be ? I was thinking coil packs ? Maybe afm ?

Pretty hard to tell without an accurate description... But yes it sounds like your coilpacks. If they are still OEM and done over 100k kms, with a little bit of moisture they tend to f**k out. When mine went, I had just washed my car, drove fine until I tried to give it shit, then it felt almost like boost cut, no power at all.

If it was doing it all the time, check your fuel pump/filter. Maybe you were starving it of fuel.

Yeah they are standard coil packs it was real strange tho wasn't a misfire it was like it was a complete dead spot when I I pressed the accelerator it was like the car was off no miss nothing just a dead spot

So was it just a certain point in the power band or it just wouldn't accellerate at all ever? Or would it drive normally if you babyed it, and only 'died' when you tried to rev it a bit?

Yeah they are standard coil packs it was real strange tho wasn't a misfire it was like it was a complete dead spot when I I pressed the accelerator it was like the car was off no miss nothing just a dead spot

Alternator should provide all the voltage needed while car is running. Technically you could remove a battery once the car is started and not notice anything.

Check the links at the battery terminal

Maybe cam or crank angle sensor?

My vy did the same thing, only the engine stopped completely and I had to restart the car. No noise, no splutter - just died.

Turned out to be the distribution module underneath the coilpacks, which got the signal from the crank angle.

Edited by voncina

Alternator should provide all the voltage needed while car is running. Technically you could remove a battery once the car is started and not notice anything.

There's a link for ECU there, pull that out and the engine will shut off. Happened to me on my R31 and R32. Don't know about the newer cars.

Yes you can pull the battery out, just remember where the alternator wire connects to.

Sorry, I wasn't aware of that wire. Disregard me then.

There's a link for ECU there, pull that out and the engine will shut off. Happened to me on my R31 and R32. Don't know about the newer cars.

Yes you can pull the battery out, just remember where the alternator wire connects to.

Sounds the same as what mine is doing. Completely cuts out, like it cuts the ignition, could pump the throttle and nothing. Then it comes back running perfect like it never happened.

thats exactly wat its doing... i started it yesterday and it didnt miss a beat i have no idea what it could be :/ anyone have any ideas? could it be a an airflow meter ? coilpack?

same thing happend to mine , was the AFM. I swapped it over with a working one and has run fine ever since. I would start with the cheapest and easiest options first then move on to the harder and more expensive items.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...