Jump to content
SAU Community

Recommended Posts

Hi guys, I have just been offered a job with a car allowance, so it's time to go car shopping! I have been eyeing off the Ford Utes as I want something comfortable as i will be doing a lot of miles, and a lot of grunt because why not. I also need to be able tow my race car, so that leaves the Holden's out as they don't have the towing capacity.
So, I'm down to two choices, a brand new XR6t or a Used F6 with low miles (09-10). What are the major differences between these two cars? From what I understand, when the new F6 came out it had brembos, better interior and a bigger turbo/injectors. Does the new XR6t have any new features that compete with these? Did both cars come out with the ZF auto? By the looks of it they are both in the same price range, what do you think is the better car?
I found a pretty clean F6 with low kms on Carsales, do you think it's a better buy than a new xr6?

http://www.carsales.com.au/private/details/Ford-Performance-Vehicles-F6-2009/SSE-AD-1029023/?Cr=17&sdmvc=1

Link to comment
https://www.sau.com.au/forums/topic/429806-used-f6-ute-or-new-xr6t-ute/
Share on other sites

The holdens have the same tow capacity as thes vehicles you listed. ALL are rated @ 1,600kg.

Personally, for my next daily, I will be getting a BMW X5 second hand.

2006/7, leather interior, euro build quality, 6sp auto, 165kw / 500nm Turbo Diesel straight 6 (can flash tune them to 180kw / 600nm). They are currently going for around $35k to $40k with anywhere from 90k to 120k. And being a diesel, it will just keep going and going.

Pefect for a comfortable cruiser that can most certainly tow whatever you throw at it. Similar year model Audi Q7's are for similar coin.

Edited by Tonba

Hi guys, I have just been offered a job with a car allowance, so it's time to go car shopping! I have been eyeing off the Ford Utes as I want something comfortable as i will be doing a lot of miles, and a lot of grunt because why not. I also need to be able tow my race car, so that leaves the Holden's out as they don't have the towing capacity.

So, I'm down to two choices, a brand new XR6t or a Used F6 with low miles (09-10). What are the major differences between these two cars? From what I understand, when the new F6 came out it had brembos, better interior and a bigger turbo/injectors. Does the new XR6t have any new features that compete with these? Did both cars come out with the ZF auto? By the looks of it they are both in the same price range, what do you think is the better car?

I found a pretty clean F6 with low kms on Carsales, do you think it's a better buy than a new xr6?

http://www.carsales.com.au/private/details/Ford-Performance-Vehicles-F6-2009/SSE-AD-1029023/?Cr=17&sdmvc=1

Trannie is the same as far as I know.

Depends on how many horsepowers you want as to whether the upgrades are worthwhile. Stocker cant be tuned to go pretty hard.

Also there was a recent run of limited edition utes with upgrades to interior etc. May be worth looking for one of them as an option.

The poverty pack xr6 interior isnt brilliant but you may be able to get a lux pack. Gives you leather, 19" rims, satnav and doof doof. Or just get leather if you want.

Both come with the some ZF auto. The F6 has bigger turbo, cooler, injectors and can make close to 300rwkw with just a tune. The F6 also comes with brembo's better interior and some other bits n pieces.

The new XR6T has a bigger center screen with satnav as standard I think. Both are awesome to tow with.

Correct me if I'm wrong but the XR might use more fuel as the smaller turbo would be on boost more than the 3540 in the F6.

I'd probably go with the F6 as the Brembo's would be nice to tow with. Plus it's a better car all round.

  • 3 weeks later...

Over on the XR6 forums I've heard the FG's are known to have a number of issues. do you think it would be a risky purchase buying an F6 or XR6t out of warranty?

Would only be looking at something with under 30,000 kms, but I don't want to buy a lemon!

get the xr6t and upgrade to brembos.

any idea what the brembos would be worth?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
×
×
  • Create New...