Jump to content
SAU Community

Recommended Posts

I wouldn't stress about it. so long as the fuel regulator is hooked up no probs. Use it for your boost gauge.

Thanks for reply ill be using it for my aftermarket boost gauge if its an extra vac line. Hopefully this helps out someone else with the same issue.

Sorry i thought you were wondering what it was for and wanted to know what went there originally. My mistake. Didnt realise you wanted to know what you can use it for.

No stress champ, Thanks for all the replies =), if anyone thinks it should be used for something else let me know. Going to be used as a vacuum feed for my boost gauge at this stage.

Hey mate. Didnt read through the whole thread so sorry if its been answered.

My R33 has that too. When i bought it, it just had a blanking rubber thing off it. Mine is a 1998 Model, and have only seen them on these so far too.

Seems like it was just some random extra nipple added for some unkown reason.

I ripped off the blank and use it for my boost gauge feed too. So your all good, nothing has been left off :)

If you look closely, you'll see it there with the hose running off to the Apexi sensor on the fusebox.

EngineBayRadiator.png

Hey mate. Didnt read through the whole thread so sorry if its been answered.

My R33 has that too. When i bought it, it just had a blanking rubber thing off it. Mine is a 1998 Model, and have only seen them on these so far too.

Seems like it was just some random extra nipple added for some unkown reason.

I ripped off the blank and use it for my boost gauge feed too. So your all good, nothing has been left off :)

If you look closely, you'll see it there with the hose running off to the Apexi sensor on the fusebox.

Thank you exactly the answer i was looking for, My engine is out of a 1998 S2 GTS-T, hence why it has the same nipple. nice engine bay btw ;)

my old 1998 R33 GTS-t S2 had the same nipple, I hooked up my Apexi Power FC MAP sensor to it.

Thanks for the reply =) helped out as well i now know it can be used for different applications.

ill most likely hook it up to my boost controller. I hope this thread helps someone else with the same issue.

Thank you to everyone for replying and trying to help out.

Edited by DarkRyda

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...