Jump to content
SAU Community

Recommended Posts

  • 2 months later...

They're amazing, have tuned several cars with them already and you have very little issue with reversion when you back off the throttle on light load unlike the Z32 where I often recommend placing a few bends in the intake.

I've just ordered the higher reading HPX ones for another 2x cars I'm tuning (both on Nistune). Literally click a drop down and select the R35 AFM and pipe size.

  • Like 1

My R32 just got done tuning with Nistune using R35 AFM as well.  But since I'm running factory size tube (65mm) and the existing VQ map doesn't go below 3", my tuner spent an hour just re-mapping the VQ map.  After he was done he was so impressed with R35 AFM that he ordered new R35 AFM for his personal R32.  

all the tuning is done in the following table so you actually dont really need the data, i've had to make dozens of maf curves from scratch as we mix and match housings and cooler pipe sizes on a weekly basis.

Most people forget that with powerFC the FUEL table is only a target AF table and should not need "TUNING" (Fill in your taget afs in the INJMAP table then tune in the AIR FLOW CURVE table)

image.thumb.png.c55819c23e0ace414c663b4d5e3b1ad6.png

image.thumb.png.40e1cd06a04a5ef44467f57b1234a7c6.png

 

  • Thanks 1
  • 2 weeks later...

 Glad everyone is enjoying the conversion .  I've got mine on the Dyno now being tune and we are having issues with the internal IAT in the 35 MAF messing with the reading on the stock RB 26 IAT sensor. Turning with power FC and voltage jumps out of nowhere

Edited by kunzz
  • 1 year later...
  On 13/10/2017 at 6:22 PM, kunzz said:

 Glad everyone is enjoying the conversion .  I've got mine on the Dyno now being tune and we are having issues with the internal IAT in the 35 MAF messing with the reading on the stock RB 26 IAT sensor. Turning with power FC and voltage jumps out of nowhere

Expand  

How did you go with this mate?

Also have a GTR which is currently stock with a PFC and TBE. Planning to single sooner rather than later, but won't be building the motor for quite a while so am happy to keep it simple with the PFC. A single R35 AFM would make things super simple and dirt cheap while the cars still at a very basic level.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...