Jump to content
SAU Community

Recommended Posts

Hi guys

This has probably been covered already but I am not having much luck finding it if there is.

Is there a post on recent ecu comparisons.

My build is using a RB25det

My mods planned so far

Greddy inlet manifold

High rise turbo manifold

Hta 3076 or gtx3076 turbo ( not purchased yet)

Manual box

Fmic

Bigger injectors

I guess what I am looking for is around the 400whp max and I am looking for an ecu that has a few tunes available, should be able to get me over the emissions test on one of the tunes

Adjustable Boost controll

And be MAP compatible.

I probably have missed some things as I am new to these engines.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/
Share on other sites

If you go with a plug in haltech of similar, you can choose to use the map sensor or the stock afm. You would be able to set it up to run the afm for an inspection, then switch back to the map sensor..

I'd find out your requirments for inspection before you get too far ahead of yourself.

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6988873
Share on other sites

^ Agreed, depending on state requirements are different... Most certainly should know about the test before anything else.

Also running E85 doesn't mean you instantly are "hassle free", despite the people saying how easy the test is to pass... That's only one factor as there is nothing to stop a Police officer saying "I don't think you are running E85" and off you go to the pits anyway.

And while you are at it, more research on the set-up. 400rwhp does not mean getting a GTX3076 and running E85, far too much turbo for that power aim when you can get smaller and be more responsive for the same end.

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6988882
Share on other sites

Go to your tuner, Tell him what you have just typed here and then get whatever ECU he says

No point getting an ECU that your tuner doesnt want to touch

This assumes you have fixed on a tuner first. If you haven't then research the best ECU choice for your needs and then ask who is the best at tuning them. If they are a reputable shop then go for it.

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6988981
Share on other sites

^ Agreed, depending on state requirements are different...

And while you are at it, more research on the set-up. 400rwhp does not mean getting a GTX3076 and running E85, far too much turbo for that power aim when you can get smaller and be more responsive for the same end.

Good points there to consider there, only going by what was recommended to me with the turbo size, thank you for the advice and I will do some more research when I get back to the big smoke, if I can go a smaller turbo and pick up good response then that's great, not after huge HP just some decent HP so the car is fun to drive.

If Fitting the AFM to get past licensing then running the MAP sensor part of the ecu after is what I have to do then I will do that no big deal.

Running E85 was only an option to get past the emissions part of licensing due to the fuel burning cleaner if it was needed, once car is licensed I was going to run premium pump fuel.

Ok so I have a few mates that build Rb's and I have spoken to RIPS over in NZ because I was looking at one of their manifolds at one stage and some fellas that have drift cars.

Recommended so far

Haltech

Wolf

Power FC

Link G4

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989052
Share on other sites

Definitely speak to your tuner first.

In my case, I've got a Link G4 plug-in, and my tuner has no problems tuning it. BUT, he doesn't know it as well as he does Haltech. While the Link is very comparable to the Haltech, he could do a much better job tuning a Haltech ECU, simply because he has a lot of experience with them. Not to say he doesn't do a great job tuning with the Link, but when you go to such a powerful stand-alone ECU there are a lot of ways to set things up, so with the Haltech he knows exactly what he wants to do and how he wants to set it up, but with the Link he needs to figure it out.

In the end, the two ECU's might both be great ECU's, but if going with one over the other means your tuner knows exactly how to get it to idle perfectly with the A/C on first time without you needing to bring it back for little corrections, etc...

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989285
Share on other sites

I just do not understand how a tuner could tune one ecu, but not another.

Probably just CBF. Or in the case of HKS authorised tuners - because they have nearly no competition so can keep people tied to them :)

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989564
Share on other sites

Hi everyone and thank you for your advice

I have just finished speaking to a fella over here in Perth who used to work for 101 garage in QLD

Looks like I will probably

Lol i assume you are on mobile and it automatically sent half way through a reply? :domokun:

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989993
Share on other sites

Hi everyone and thank you for your advice

I have just finished speaking to a fella over here in Perth who used to work for 101 garage in QLD

Looks like I will probably go with the Haltech unit and the 3073 turbo on top of a 6 boost manifold.

I didn't realize that running E85 was that much of a mess around ( excuse my ignorance)

Will use the AFM to pass licensing and then run the internal MAP sensor in the ecu.

The engine exhaust noise shouldn't be too much of an issue as long as its gone properly.

Most probably won't be pulled over every day like you do in a skyline majority of 5 O wouldn't expect that from an old fj holden

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989996
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...