Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

the main difference is the map sensor.

newer gen vipec runs a 3 bar map sensor vs links 2.5 bar.

that was it for the differences afaik, and if you arent looking to run more than 30 psi thats all good.

From the web site it also looks like the Vipec has knock control built in where as the Link needs the knockblock add on?

And isnt it 20psi for the link? Because you have to take away 1 bar for the atmosphere?

I recent acquired a link cheap so I didnt research as much as usual so have some questions from someone who has used them!

From the web site it also looks like the Vipec has knock control built in where as the Link needs the knockblock add on?

And isnt it 20psi for the link? Because you have to take away 1 bar for the atmosphere?

I recent acquired a link cheap so I didnt research as much as usual so have some questions from someone who has used them!

as i said, 3 bar absolute vs 2.5 bar absolute (so take 1 bar away from both to get positive pressure)

Hatlech doesnt have knock control does it?

What model did you get?

as i said, 3 bar absolute vs 2.5 bar absolute (so take 1 bar away from both to get positive pressure)

I see, now I am on the same page

sending you to swim with Sharks :dry: eh!

kinda tells me they wanna get rida ya :devil:

Lol nah they like me too much, I deal with the people they don't need to lol

Swimming with sharks is like getting something out of the bottom draw in from of a seedy old man.

You feel safe, until you leave something exposed

This is very true, I'll either get eaten or speared by a stingray haha

they are a nice ecu and can do lots of nice extras, flat shifting and igition retard launch control provide pops bangs and stationary flutters/bov

ie, sitting at the lights clutch in, revs up, turbo spools, left off throttle. aww yea, 20 psi sitting still.

also they sound awesome with the antilag on.

they are a nice ecu and can do lots of nice extras, flat shifting and igition retard launch control provide pops bangs and stationary flutters/bov

ie, sitting at the lights clutch in, revs up, turbo spools, left off throttle. aww yea, 20 psi sitting still.

also they sound awesome with the antilag on.

whos car is this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...