Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

moaning all. living in the northside is sucking at the moment.

nothing but dramas with housemates. think i picked the wrong housemates.

made current housemates an offer for me to leave if they can find a friend of theirs to replace me. just need to locate some blank a4 paper to print my letter and leave it for them to respond.

i sense another move is on the cards.

moaning all. living in the northside is sucking at the moment.

nothing but dramas with housemates. think i picked the wrong housemates.

made current housemates an offer for me to leave if they can find a friend of theirs to replace me. just need to locate some blank a4 paper to print my letter and leave it for them to respond.

i sense another move is on the cards.

Where on the north side are you?

Missus is in property management so depending on where you are may be able to provide some assitance.

moaning all. living in the northside is sucking at the moment.

nothing but dramas with housemates. think i picked the wrong housemates.

made current housemates an offer for me to leave if they can find a friend of theirs to replace me. just need to locate some blank a4 paper to print my letter and leave it for them to respond.

i sense another move is on the cards.

That escalated fast!

Every now and then, you come across something amusing in cases. The following happened when an employee was summoned into a meeting. Essentially meeting was an ambush to dismiss him. This is the employer's version: "Mr Hara says that Mr Morton turned up on 5 February 2008 in casual clothing, refused to discuss the various security concerns which Mr Hara wished to raise and said words to the effect that he had a "ball-brushing offer" he had to go and sign and was thereafter escorted from the building."

So much for planned ambush meeting lol

moaning all. living in the northside is sucking at the moment.

nothing but dramas with housemates. think i picked the wrong housemates.

made current housemates an offer for me to leave if they can find a friend of theirs to replace me. just need to locate some blank a4 paper to print my letter and leave it for them to respond.

i sense another move is on the cards.

not good mr benno not good at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
×
×
  • Create New...