Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Sup Y'all?

I've been hiding... Busy working too much, getting a house built, planning weddings... The usual time consuming stuff...

Damn work made me miss pork knuckle :( It's been a whole 4 days since my last pork knuckle :( But that one was at Barvarian Bier Cafe not Z german club...

No more like.... *Marp marp marp marp marp crush grind ping knock knock knock knock*

This was more along the lines of it.. it was telling a lot of poor knock knock jokes till it was no more. Driving it home in 5 cylinders didn't help either

u need to get it checked out man. I think it's internal sadly :(

sigh... ill keep looking for something. might try and do a comp test and check for leaks this weekend.

would a small leak cause it to hunt like that? or a possible dead coil pack?

i unplugged the AFM and still ran shit dont think its a air leak...

sigh... ill keep looking for something. might try and do a comp test and check for leaks this weekend.

would a small leak cause it to hunt like that? or a possible dead coil pack?

i unplugged the AFM and still ran shit dont think its a air leak...

facts are as follows Ed:

1. Something went bang whilst driving / been driven

2. Big puffs of smoke coming out the exhaust (what color is it BTW?)

3. Engine runs like a donkey ever since noise occurred

4. New set of plugs did not fix the problem

5. Take the guidance of Ants and see a Mech for diagnosis of engine

Yes, leak test and comp test are on the cards Ed.

Im guna say it.

I call bs it went bang at idle. You were boosting and split a hose. Do a boost leak test, check all hose clamps, ic piping etc.

seriously it was sitting at lights when it happen didn't even boost it cause car was still cold.... so from that video you would look for a split ic piping ect?

seriously it was sitting at lights when it happen didn't even boost it cause car was still cold.... so from that video you would look for a split ic piping ect?

just watched the vid. Sounds terrible but could be the location. Let idle and pull coil pack connectors 1 at a time and see if rpms change. If the rpms drop on a particular cyl report back. Edited by MagicMikeZ32

just watched the vid. Sounds terrible but could be the location. Let idle and pull coil pack connectors 1 at a time and see if rpms change. If the rpms drop on a particular cyl report back.

ok will try this in the morning pending time.

G nite all

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...