Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Qlders must be much more relaxed. Down here you go out with fully hectic sik aspiring amateur want to be race car drivers that chop you on corners, spray debris all over your car, because they can't stay on the black stuff; over rev and drop oil and conrod/block pieces all over the track or run into the back of your car b/c apparently friendly track day means full boost up your arse and then realise the merits of a brake upgrade after the fact. That's it I am moving lol

Didn't make it to happy laps this morning... too many schnapps at the german club last night :P

What's wrong with this picture? #@Sick_R31

20140621_155006.jpg

You should have been installing S13 hubs so you have a car to load onto a trailer? And also what Andy circled

Qlders must be much more relaxed. Down here you go out with fully hectic sik aspiring amateur want to be race car drivers that chop you on corners, spray debris all over your car, because they can't stay on the black stuff; over rev and drop oil and conrod/block pieces all over the track or run into the back of your car b/c apparently friendly track day means full boost up your arse and then realise the merits of a brake upgrade after the fact. That's it I am moving lol

Happy laps are just fast paced cruise laps, idiots like that get kicked off pretty quick.

Qlders must be much more relaxed. Down here you go out with fully hectic sik aspiring amateur want to be race car drivers that chop you on corners, spray debris all over your car, because they can't stay on the black stuff; over rev and drop oil and conrod/block pieces all over the track or run into the back of your car b/c apparently friendly track day means full boost up your arse and then realise the merits of a brake upgrade after the fact. That's it I am moving lol

well that doesn't sound very appealing mate.

Sadly, there will always be the gung-ho fully sick yobos

Although I think we (as a club) would filter them out rather quickly as no one wants that

Yeah dooooooo eeeeeettt

Move to QLD - the best state :P

Was good to watch today

Found out a way to inflate my tyer today after nick pointed out it was super low

Was at 14psi

Had to use a bike pump hose, rubber hose, cable tie, air blower and a pressuer regulator. Got it over inflated then dropped it down to what I need with the pressuer Guage.

Have got valve extenders on the way now

Found out a way to inflate my tyer today after nick pointed out it was super low

Was at 14psi

Are you a woman? Crash your car, need people to tell you your tyres are low :P

Didn't make it to happy laps this morning... too many schnapps at the german club last night :P

I am envious of your German Club outing... :cheers: we need one ASAP!

  • Like 1

Was good to watch today

Found out a way to inflate my tyer today after nick pointed out it was super low

Was at 14psi

Had to use a bike pump hose, rubber hose, cable tie, air blower and a pressuer regulator. Got it over inflated then dropped it down to what I need with the pressuer Guage.

Have got valve extenders on the way now

Couldn't you have just driven it to a service station?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
    • Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
×
×
  • Create New...