Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Well its still something one needs to pay when buying brake kits from overseas.

Also, Akebono's don't fit. Dam.

Now i'm really intrigued about those Autech brakes. AP racing 6 piston kit with the same size rotor fits under my car, the rotor on the Akebono's is just too chunky. So its possible that these Autechs would fit. What isn't possible is finding the dam specs of them though

Well its still something one needs to pay when buying brake kits from overseas.

only for items costing $1,000 (inc. postage) unless tobacco or alchohol

and its customs duty then 10% GST on any imported good declared at >$1,000

Also, Akebono's don't fit. Dam.

Now i'm really intrigued about those Autech brakes. AP racing 6 piston kit with the same size rotor fits under my car, the rotor on the Akebono's is just too chunky. So its possible that these Autechs would fit. What isn't possible is finding the dam specs of them though

Autechs are huge - and I bet they wont fit your 17inch te37's

have you seen Fatz brake sale thread?

http://www.skylinesaustralia.com/forums/topic/434418-fatz-big-brake-sale-grex-ap-racing-brembo-stoptech/

Well, good luck finding a brake kit for under $1000!

And for customs duty, what's involved there? never dealt with large overseas purchases before.

Just checked, can fit Alcon 365mm 6 piston kits. TE37's are awesome.

Well its still something one needs to pay when buying brake kits from overseas.

Also, Akebono's don't fit. Dam.

Now i'm really intrigued about those Autech brakes. AP racing 6 piston kit with the same size rotor fits under my car, the rotor on the Akebono's is just too chunky. So its possible that these Autechs would fit. What isn't possible is finding the dam specs of them though

Why don't the Akebonos fit?

The caliper is to tall, the total diameter including caliper is greater than the internal void on the wheels.

Which surprises me, as as mentioned above i can fit 365mm kits and not the 355mm akebonos.

The caliper is to tall, the total diameter including caliper is greater than the internal void on the wheels.

Which surprises me, as as mentioned above i can fit 365mm kits and not the 355mm akebonos.

I see. I see

Buy the fronts in this thread ;)

http://www.aus300zx.com/forum/showthread.php?t=329553

Rears are cheap minus rotors/pads

Edited by MagicMikeZ32

Would require dumping 4K on new wheels first...

Heck I cold just buy another skyline or 2 instead of trying to get those brakes to fit!

Edit: picture of 3 different brakes.

As you can see the Akebono's (red) stick out about 10mm more per side than the AP's (black) with the same size rotors. The 365mm Alcons (blue) are in the middle but have a better profile which seems to match the TE37's slightly better (they also curve in towards the front). I'd have to take it off again to check but from memory it's actually the tip of the middle hump that clashes with the Akebonos, not the top hump.

post-57955-0-63938700-1406863865_thumb.jpg

^^^ spot the engineer

:P

I thought he just liked drawing pictures :P

Would require dumping 4K on new wheels first...

Heck I cold just buy another skyline or 2 instead of trying to get those brakes to fit!

Edit: picture of 3 different brakes.

As you can see the Akebono's (red) stick out about 10mm more per side than the AP's (black) with the same size rotors. The 365mm Alcons (blue) are in the middle but have a better profile which seems to match the TE37's slightly better (they also curve in towards the front). I'd have to take it off again to check but from memory it's actually the tip of the middle hump that clashes with the Akebonos, not the top hump.

I would have looked and gone ehh doesn't fit, new wheels needed... :D

The Akebonos are chunky as fuark calipers. If you actually see them, they're larger than life. Much like my... any way.

With puchasing from o/s. You pay the cost of the goods + shipping to supplier ($x). Pay 2.5% import duty (1.0025.$x = $y) then you pay GST on that sum so 1.1x$y

Ants would probably need to correct me on import duty value.

Just checking in all, I'm
Not actually dead haha

Still under the thumb?

Autechs are huge - and I bet they wont fit your 17inch te37's

http://www.skylinesaustralia.com/forums/topic/439623-brake-clearance-thread/ 375mm rotor, alcon 6 pot caliper behind a 17" TE37

What would one say if they were looking for a 33 gtst and it was for sale for 3700 with fmic hks blow off, no rego or Rwc

Is hks bov plumb back or atmo? If atmo that is one of the reasons there is no rwc. Also many holes were cut to fit the fmic and was the reo cut as well?

The Akebonos are chunky as fuark calipers. If you actually see them, they're larger than life. Much like my... any way.

Cricket bat... Your cricket bat is rather large...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...