Jump to content
SAU Community

Sinergy Motorsports Adelaide


phil48
 Share

Recommended Posts

Have had no dealing with buying from Sinergy, just going to post up a few interesting facts:

1) Take a look at this black v36 coupe - according to the ad VIN is: 6U9000CKV36405081

http://www.carsales.com.au/dealer/details/Nissan-Skyline-2008/AGC-AD-14093947/?Cr=10&sdmvc=1

Grab the chassis/frame number off the end of that VIN ie. CKV36-405081 and plug it in to a part sourcing/month of production tool such as: http://www.epc-data.com

Note the colour code - A54. This car should be 'Vibrant Red' - NOT black. Look up the paint code on this handy website: http://www.nissanreference.com/infinitig

2) Grey v36 coupe - according to the ad chassis/frame # would be CKV36-401081 (spooky how similar it is to the above):

http://www.carsales.com.au/dealer/details/Nissan-Skyline-2007/AGC-AD-14249040/?Cr=6&sdmvc=1

This car should be QX1 'Ivory Pearl' (white), NOT grey.

3) White v35 coupe - according to the ad chassis/frame # would be CPV35-504062:

http://www.carsales.com.au/dealer/details/Nissan-Skyline-2003/AGC-AD-13371614/?Cr=7&sdmvc=1

This car should be KY0 'Brilliant Silver' - NOT pearl white.

4) Silver Stagea - according to the ad chassis/frame # would be NM35-317114:

http://www.carsales.com.au/dealer/details/Nissan-Stagea-2003/AGC-AD-12563859/?Cr=3&sdmvc=1

This car should be QX1 'Ivory Pearl' - NOT silver

5) Another silver Stagea - according to the ad chassis/frame # would be PNM35-700027:

http://www.carsales.com.au/dealer/details/Nissan-Stagea-2004/AGC-AD-13606744/?Cr=5&sdmvc=1

This car should be B21 'Athens Blue' NOT silver

-

Does Sinergy expect us to believe it has 'butter-fingers' enter all of their sales Ad's for them? Really... the question that needs to be asked is:

Why doesn't Sinergy provide genuine VINs when it advertises it's cars online?

Edited by dodgyimports
Link to comment
Share on other sites

i have had pour dealings with there service section and one of the managers i dont know how he calls himself a proud owner but i dont know about their sales staff and processes...i know there expensive...i would see iron chef or someone similar. there are several good guys out there who dont have a bad word against them.

Link to comment
Share on other sites

  • 2 months later...

Why doesn't Sinergy provide genuine VINs when it advertises it's cars online?

I'm now able to answer my own question. Per the above post Sinergy have a strange habit of advertising their cars with "real looking" VINs thanks to their fat-fingered webmaster.

Fortunately Sinergy have recently aquired some new stock - and one of those new stock is a bit less generic:

a 2005 Nissan Skyline 350GT in red (an uncommon colour). Have a look on your favourite auction statistics site - you will find only one 2005 red v35 coupe has sold within the last 3 months and I suspect the total number this year would be less than 10.

Let's have a look at the VIN per the CarSales ad. (you'll need to use the IOS/Android/RT app - for some reason carsales hide the VIN field on their regular website these days :( )

XWDCI5j.png

According to the ad the vehicle chassis number would be: CPV35600186 - but according to that number the car should be QX1 (pearl white).

One of our (very few) 2005 red candidates conveniently has the chassis number CPV35600986 - only 1 digit difference!

MRg8kao.jpg

6kzWhYis.jpg mTtCg5Ms.jpg eCzU9bDs.jpg

So - the chances are already highly likely that we've found the same car but further confirmation comes when we run the chassis number through the Australian government RAWS compliance database.

PaB1Cijl.png

Conveniently enough the car with our corrected chassis number had it's compliance done recently by "Redicorp Pty Ltd" - registered to an address in Adelaide, SA.

Therefore the answer to my initial question in the case of this particular car is precisely : -31,385

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Blitz ER34 at some point hopefully, should be allowed in Gr3 if they do.
    • Stock R33 boost control, with the exhaust, and FMIC done, will boost creep. There is no tuning around it if it is the factory boost solenoid.   If it has an aftermarket electronic boost controller, the settings/mapping can be altered in it.   Oil could be anything as mentioned, however did it ever do it before you did the turbo swap? How much and how often did you drive the car before the swap?   I'm hinging on too much oil supply, or it's not draining properly.   To check, pull the air outlet off the turbo. Is it full of oil? Drop the exhaust at the turbo, does it appears to be oiled/coked? Now pull turbo and check the exhaust manifold, does it appears oiled and coked the same way?   Secondly, the PCV could even be stuffed / not functioning properly and will cause blowing of blue smoke.
    • Almost any ECU would work, from a 30 yr old PowerFC to a new Motec/Autronic. But presumably you want new middle of the road ECU, meaning that you want a Haltech or a Link, most likely. As to which model though? I dunno. I don't keep track of what they have in their current ranges. You don't want a plug in though, because plug ins can start to cause you the same wiring issues that you have to chase up with your stock ECU/loom swaps when an engine transplant is involved. If you use a Haltech (and presumably a Link) you could put the base map for the engine in and drive it around and not even need to "tune" it. It will work just fine. I can't recommend a tuner without a location (and even then I can't recommend many, being as I never use any tuners except myself and my brother-in-law). And not many tuners are happy to remote tune. Maybe they'd be happier doing it for a basically stock setup that just needs to be demonstrated to be working properly. But even then, not being able to be with the car to see what the hell is going on and sort out the inevitable problems that will result from an engine conversion done by an amateur..... unlikely to be enthusiastic about the job. And if you think that just adding 2 wires for the boost sensor is difficult - you don't want to be trying to install and set up an aftermarket ECU. You're going to have to bite down hard on something with either approach.
    • wired everything up and confirmed that the red with white stripe is indeed the fuel pump pin on this harness. 
×
×
  • Create New...