Jump to content
SAU Community

Strange Noise From Engine Bay When Pressurizing Intake

Hanaldo

By Hanaldo,
in Engines & Forced Induction

 Share

Recommended Posts

Hanaldo Grand Master

Hanaldo

Posted
Posted (edited)

Hey all,

I just wanted to quickly clarify whether this noise I am hearing is normal or not. When I pressurize the intake using an air compressor to test for leaks, I have noticed before that I get an odd whine coming from somewhere in the engine bay. I have narrowed it down to having something to do with the charcoal canister, as when that is disconnected and the lines blocked, the sound disappears. However the sound emanates from the back of the engine bay, over near the brake booster.

Now I am totally unsure why, but when I first made this discovery a few months ago I dismissed it as being normal. Upon hearing it again, I had the thought that perhaps this isn't normal and is an issue that I should rectify.

So, here is a video of pressurizing the intake with the charcoal canister disconnected. Note no noise:

Here is another video, now with the charcoal canister connected again. Note the noise that comes in at approx. 11 seconds.

I should also point out that I have never heard the sound while driving, I guess because the noise of the car covers it up or possibly the noise doesn't occur with the engine running.

Edited by Hanaldo
89CAL Grand Master

89CAL

Posted
Posted

Can you unplug the hoses from the charcoal canistor one at a time to isolate which part of the system is making the noise. Just tryong to think where the lines run. One to the throttle body on the intercooler/turbo side of the TB, one to the manifold, one to the fuel tank breather and one more? Cant remember and dont have my car handy lol

0zhiph0p Community Regular

0zhiph0p

Posted
Posted

I'm not sure what help this is but when we pressurise air systems in trucks and trailers at work on 100 psi to release the brakes for brake adjust or whatever, the air tanks can make this sound for a minuite then the sounds goes away when they are full, it may be normal.

GTRNUR Grand Master

GTRNUR

Posted
Posted

The charcoal canister should only ever see vacuum as the diaphragm that opens it only gets exposed to vacuum at light throttle opening due the a valve on the cylinder 1 throttle.

I've heard that sound before, and it sounds more like throttle gasket or shaft seals.

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Well considering the noise is only there when the charcoal cannister is connected, does that not mean it must be related to it? I can pump 20+psi into the system with the canister disconnected and it will be dead silent.

Also Nur, and what do you mean cylinder 1 throttle? The engine is a 25 Neo, so there is no Cyl 1 throttle. I did think the noise might be related to a diaphragm that doesn't normally see positive pressure, HOWEVER. When I installed the Plazmaman plenum, I ran new hose for the charcoal canister so that I could run it a natural way. It now goes straight into the plenum through standard 1/4" hose. No valve anywhere. Is that likely to be a problem?

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Where is the valve supposed to be for the charcoal canister? If I have deleted that valve without knowing it, would the charcoal canister essentially be a big boost leak?

abr33 Proficient

abr33

Posted
Posted

That is the sound of air leaking past a diaphram valve im guessing the one that only opens on vacuum being present. And sounds like a fairly small amount at that. Find the valve, and inspect. Not sure about the 34 ones but 33 is the round bit on top of canister

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Does anyone know where this valve is? If it is between the canister and the plenum, then it no longer exists. I've run 1/4" hose directly from the canister to the plenum, there's no valve in that line. If it is in the line between the fuel tank and the canister, does anyone know where? I can't find a diagram anywhere.

hardsteppa Grand Master

hardsteppa

Posted
Posted

i do the same test from time to time, and haven't had that noise....just sounds like a leak to me. What's the pressure gauge doing, going down? After I replaced the leaking PCV valve mine holds pressure pretty well, no rapid drop or sound of leak like that. Other option would be to try getting can of party smoke and filling air compressor with it, then pressurising and seeing if any colored smoke coming out anywhere..?

abr33 Proficient

abr33

Posted
Posted

Well the sound doesn't come from anywhere near the canister. Its definitely over near the brake booster.

the inline chechvalve on booster line? remove/block booster line and test?

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

That valve is fine. The noise isn't coming from the brake booster, just some where near it. I block off the charcoal canister and it goes away, has to be something to do with that, surely?

scotty nm35 Grand Master

scotty nm35

Posted
Posted

That is the solenoid for the charcoal canister, so it only sucks air from the tank when there is vac in the manifold. Perhaps it's leaking? It looks like the same part my car uses for a stock boost controller.

  • Like 1
Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Hmmm... I imagine it won't be an easy part to find :/ I don't really want to block off the charcoal canister though. Would definitely much rather keep it.

I doubt this is the cause of my power issues anyway, it's barely leaking at all :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...