Jump to content
SAU Community

Recommended Posts

Hey guys does anyone know whether mounting gauges in the dash in front of passenger is legal or not I have searched everywhere and nothing explains it. There is lots about on the dash and side pillar but not in the dash itself? Help please!!!!!

Link to comment
https://www.sau.com.au/forums/topic/431851-gauges-mounted-in-dash-illegal/
Share on other sites

As far as I know they are only illegal if obscures your few out the window and I do believe not allowed to be above dash line. Mines mounted on pillar and is spot on in line with the highest point of the dash around dash cluster.

I have mounted 4 apexi ones in the dash where some cars have front passenger airbag. My concern is a cop will tell me that its illegal because the passenger could hit them in a crash but I can't find any info

I have mounted 4 apexi ones in the dash where some cars have front passenger airbag. My concern is a cop will tell me that its illegal because the passenger could hit them in a crash but I can't find any info

Thats a tricky one to work around I think cause as you said thats more then likely what they'll go you on.

Pretty keen to know the exact rules on these as well. I know the guage pillar that sits above dash is definitely illegal in QLD.

But whether the 3 gauge pod that sits on top, I'm not sure but have seen a lot of other cars with these.

When I bought my 32 gtst my boost gauge was in the glovebox haha...

Edited by ZRBE

Mechanical gauges inside the car are a no no. Electric gauges only (unless something has changed).

Mounting - can't obscure vision, can't be more forward than the front most part of your dash (hence no A-Pillar placement unless factory like the JDM S15)

The new ADR's are a pain in the ass, trying to find the exact ones for you.

  • Like 1

Cops don't seem to have a worry about where mine is on pillar down at most furthurest point so doesn't obsure window at all. In saying so it is blocking the demisted for driver window.

Mechanical gauges inside the car are a no no. Electric gauges only (unless something has changed).

Mounting - can't obscure vision, can't be more forward than the front most part of your dash (hence no A-Pillar placement unless factory like the JDM S15)

The new ADR's are a pain in the ass, trying to find the exact ones for you.

Okay, great.

So, ie. boost guage with vacuum line (mechanical?) - Illegal.

Oil temp (electric?) Legal?

Sorry.

  • Like 1

Okay, great.

So, ie. boost guage with vacuum line (mechanical?) - Illegal.

Oil temp (electric?) Legal?

Sorry.

That's what I've heard as well. Apparently in a crash hot oil can potentially make it's way into the cabin via the hose and be a hazard?

That's what I've heard as well. Apparently in a crash hot oil can potentially make it's way into the cabin via the hose and be a hazard?

Never herd of that.. But my car is going to be so overkill when it comes to heat wrap & the material I use for all my engine bay hoses lol

Well then that'd make my boost gauge illeagal seeing as it has a air tube going from back of gauge to the engine bay. Would it? I mean it's only a air tube right? No fluids?

Well then that'd make my boost gauge illeagal seeing as it has a air tube going from back of gauge to the engine bay. Would it? I mean it's only a air tube right? No fluids?

It's just a vac line off the manifold so no fluids.

Downloaded this PDF from QLD Transport a while back.

Thank you Jiffo. Printed.. so its a field of vision thing. I would be willing to take that to court. If I attach my GPS Unit that is way worse than A-Piller gauges...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...