Jump to content
SAU Community

Recommended Posts

Hi all,

Been slowly piecing this together but now I need to buy Yokohama tyres for wtac :) my loss ur gain!

Bottom end

Venolia 86.5mm forged pistons (unused)

New n1 piston rings

Nitto conrods used (cleared to be reused). All new rod bolts

Block and girdle machined to suit pistons (needs crank)

Nitto oil pump used - currently at nitto getting all clear to be reused

Head

Journal 1 on exhaust size chewed out. New bearing made to suit.

Head decked, pressure and vacuum tested.

Bronze super tech valve guides (already knocked in)

Super tech oversized intake and exhaust valves (used)

Buckets and cam caps ( no springs and retainers )

Tomei procams 260 10.25mm lift (head machined to suit)

Also,includes 12 hours worth of port work to improve response on track car.

All parts located in syd and not looking to part out at this stage

$5k or swap for two new sets of Yokohama ao50s 295s :P

:cheers:

post-31999-0-59995300-1379851909_thumb.jpg

Oil pump is undergoing complete refurb with new alloy backing plates plus housing. All gears and clearances machined and adjusted to spec. Andrew from nitto has been a great help. I requested to buy a new one but he assured me this is virtually new at a fraction of the cost.

:cheers:

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

I might be interested in the head. Pm me. Maybe me and and Wor57 can divvy it up.

Also, I have an r33 long nose crank coming out of my car if you need it to complete you bottom end.

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...