Jump to content
SAU Community

Recommended Posts

UPDATE: just blew the old turbo, defiantly rejoicing over my decision to buy stock turbo. Glad i didn't throw on fuel rails and try to tune that setup, like some suggested haha.

Question: can i limp a blown turbo around if i stay off boost for a week?(no smoke yet)

don't blame the turbo when you're the dickhead that was driving it and trying to rev it past 4k with no tune and popping cooler pipes..even though "SOME SUGGESTED" you shouldn't even be driving it...

just keep driving it mate she'll be right....haha!!!!...:dry:

don't blame the turbo when you're the dickhead that was driving it and trying to rev it past 4k with no tune and popping cooler pipes..even though "SOME SUGGESTED" you shouldn't even be driving it...

just keep driving it mate she'll be right....haha!!!!... :dry:

Not blaming the turbo haha, the plan to go back to stock was so i could thrash the rb with a safe tune. Try NOT driving like a dickhead when it's your first skyline and theres meat on the tyres x]

No one has asked this so I'm going to.

Why did you buy a heavily modified skyline if you wanted something stock? Surely you paid way more than it was worth as well.

Well, You nailed it brother. Costs more than what it was worth, and a headache and a half. Being straight up, i had no idea what to look out for when buying a car, i checked for oil leaks, service history and all panels were straight and working.

The big turbo kinda suckered me in, plus the engine was literally just put back together after being machined. Also, i didn't really think it was a big modification and if necessary i had money at the time to deal with a fix if it was required.

All you needed to fix your car wss a tune from the get go. And a few things here and there. You have taken years off its life punting it untuned and you have lost money because no one will buy a broken turbo.

Without money for a tune, tuning is out of the question. Still questioning my friends diagnosis of a blown turbo... there is a change in the whistle, but it's a very small change and it still spins without any clunking. Could still potentially be a vacuum leak or seals dead. Regardless of that, since powercruise is just around the corner where do you suggest i tune my car with all the tuners in perth (c-red,pcp, japwreck, allstars,ovaboost etc) busy till late october? (I've been to every tuning garage in Perth finding the cheapest quotes.)

Edited by iTwix

I dont see how you had no money. You went and bought all these stock bits for your car, all up you would have been a few hundred bux off a tune.

I think you need to get your priorities straight or just sell the bloody thing.

I dont see how you had no money. You went and bought all these stock bits for your car, all up you would have been a few hundred bux off a tune.

I think you need to get your priorities straight or just sell the bloody thing.

If you tune a pig with shitty parts, it's going to be a fast pig. Parts needed to be replaced, and since they don't regenerate i had to pay for them. As i just said twice, i can't f**king tune it when all the shops are booked out, but i'm waiting in line.... can't do much besides wait, so whats your problem?

I think your best option is all star garage.

Few people on here use them and have said good things as well.

Maybe take it into them after saving some coin?

Also I would take the intercooler pipe and get someone to put a bead on it. That will stop it popping off :)

I think your best option is all star garage.

Few people on here use them and have said good things as well.

Maybe take it into them after saving some coin?

Also I would take the intercooler pipe and get someone to put a bead on it. That will stop it popping off :)

Yeah they seemed like nice guys :D

Intercooler pipe has a bead, but it's got a shit joiner clamped with a radiator hose. i have new intercooler pipes ready and waiting with ribs on the ends and silicon joiners :)

Nice work dude.

It looked really loose when you put it back in.

I wouldn't expect it to hold if you were able to push it back in and just leave it.

Yeah, just found out it wasn't my turbo blown, just that joiner has become very loose, loosing boost. i used one of my proper clamps from the new kit and it's back up to it's usual power and noises. I just have to granny it around now because i don't have a failsafe for overboost D:

Nice work dude.

It looked really loose when you put it back in.

I wouldn't expect it to hold if you were able to push it back in and just leave it.

i very strongly agree with you after learning more about jap cars. Learn from my mistakes i guess :P

This thread makes me :domokun: .

Money should've been spent better on getting a workshop to go over the mods.

You really should sell this and buy a stock R33 to learn with.

For the third time, money WILL be spent at the shop, i'm just waiting for my booking. This post makes me :domokun: .

Honestly. Go find an rb25det for 2k. Drop it in and part yours out. In the long run you will have hardly spent anything. You are wasting time and money. For all you know the car has shot pistons as well. Wouldn't surprise me looking at the work that has been done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...