Jump to content
SAU Community

Recommended Posts

Hi Guys, Just looking for some feedback on this. Is the PS2000 with the patch loom kit worth the extra cost over the Pro Plug In? I`m not 100% clear on the differences between the 2. All I see is a different number of I/O, different on board map sensor, and some features such as nitrous switching.

How do these differences translate to the real world for an R32, Rb26, drag and autocross application?

Link to comment
https://www.sau.com.au/forums/topic/432492-haltech-ps-2000-vs-pro-plug-in/
Share on other sites

Hi Guys, Just looking for some feedback on this. Is the PS2000 with the patch loom kit worth the extra cost over the Pro Plug In? I`m not 100% clear on the differences between the 2. All I see is a different number of I/O, different on board map sensor, and some features such as nitrous switching.

How do these differences translate to the real world for an R32, Rb26, drag and autocross application?

Unless you really want to get into wiring (like I did) get a plug in (has additional outputs/inputs from a separate plug).

Solid ecu, you won't look back.

have pro plug in.

awesome ecu.

has alot of expansion features.

I believe better for the car then the ps2000.

but, if swappin it to another car later, ps2000 is probably a little easier on that front.

The new plug in comes with an extra input via the auxiliary plug, dpi, which is required for flex fuel. Good thing.

There are a few extra avi and outputs via the aux loom without resorting to the I/O expansion box. So basically if your happy to use mostly the standard sensors with a few after thought I/O then plug in will be fine, so afr, run larger map sensor( over 2.5 bar), log external knock box, boost control through the haltech etc. all this is possible throught the plug in, if you are going to step up further with more logging then go the 2000

Dont buy a haltech! Look at the failure rates/issues on here lately. . Be crazy to buy 1! I can show you a viseo that will also change your mind ;)

Really? In interested to know more, I own one and it seems great, a mate has the ps2000, that seems like a good thing also.

If you were choosing your ecu, talk to who will tune the car for you, they will have a preference.

wouldn't happen to be a cetain1/2 jz in a BMW ur referring too?? haha

Dont buy a haltech! Look at the failure rates/issues on here lately. . Be crazy to buy 1! I can show you a viseo that will also change your mind ;)

Dont buy a haltech! Look at the failure rates/issues on here lately. . Be crazy to buy 1! I can show you a viseo that will also change your mind ;)

Haltech are a big company with 28 people employed doing nothing but improving their existing products and coming up with new ones. If there is an issue with their ECU's, they will help get it sorted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...