Jump to content
SAU Community

Complete R34 Gtr Rb26 Engine/motor, Complete Intake Side, Complete Exaust Side, Turbos Etc Perth

AAHH33
 Share

Recommended Posts

AAHH33 Enthusiast

AAHH33

Posted
Posted

i have for a sale a complete R34 GTR engine/motor. comes complete with all intake side, injectors, plenum, all exhaust side, turbos etc. starter motor, altinator, everything!

Only reason i have taken the motor out is because i bought and built a new motor, head, modified everything, and didn't want my car off the road for months. so i done all the work to another motor then just switched them over.

HISTORY: motor came out of the car with 92000kms on the clock. is factory except for HKS cam gears. has been running 15psi by previous owner and me. no service history, and i have not done the major service either, as i planned to heavily modify. ran fine in the car, pulled hard. and is unopened.

Wreckers ask 7 grand for a complete r34 motor, (the rare occasion when they pop up for sale). (can confirm its a 34 motor from the engine number) so $4400 is reasonable. PRICE is negotiable, and i have other GTR parts you may want, and we can negotiate in the price.

R33 gtr sump,r33 gtr complete wiring loom and igniter etc

Im not interested in posting, as i would like the buyer to inspect in person first before making purchase. (plus dont really have the time to organise freight for something so big and heavy)

$4400 for the whole thing, make an offer. would like to clear out my garage. please CALL or MESSAGE me here, as i currently can not text off my phone, or you can text me, and i can give you a call back.

FOR pics please see gumtree add.

http://www.gumtree.com.au/s-ad/dianella/engine-engine-parts-transmission/complete-r34-gtr-rb26-engine-motor-intake-turbos-exhaust-side/1029039259

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • GTSBoy
      Blue/grey smoke after idle

      By GTSBoy · Posted

      The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...