Jump to content
SAU Community

Recommended Posts

Hey guys and gals quick few questions.

Pulled my turbo and mani off today to change my gaskets and replace manifold studs.

My manifold gasket looked a bit average and I had a closer look on the manifold itself. There were two to three smaller sections also on the manifold itself. Is this someones average attempt at trying to seal a leak by re-using the old gasket and some new smaller sections? Or is this normal?

You can see in the photo below one of the sections had broken off plus some smaller ones in question.

0uf0.jpg

When the car comes on boost above 10psi I get a high pitched whistle (sounds like a kettle on steriods), hence why I was changing all my exhaust gaskets.

Link to comment
https://www.sau.com.au/forums/topic/433009-rb20-exhaust-manifold-gasket/
Share on other sites

That high pitched whistle is definitely a blown gasket. I'd say that yes, it just a dodgy job done by someone else thinking that the more gaskets you have the better is has to be right?!

Replace with new gasket and your away.

the two "smaller pieces" (top right and top middle) should be apart of the gasket. If you look at the bottom gasket the first two ports you can see the gasket its kind of layered. It's hard to explain but look at where the studs go and you will see a smalled inner hole and then 2-3mm outer hole, which is what the top two peices create.

The top left gasket is the "whole peice" that snapped right off..

I see what you mean, but they haven't come off the gasket they're separate individual gaskets.

I too thought the same but if u look close enough they were never from the main gasket.

I've got a multi layer one I'm about to put on this arvo along with new ones for everything else. Hopefully fixes all my exhaust leaks.

Got the manifold machined, wasn't too bad to begin with but while it was out it couldn't hurt.

New studs, washers and spacers, metal multi layer manifold gasket and replaced turbo-mani and dump gaskets. Wow haha wish I did that ages ago haha

Car feels completely different, can't wait to go and get it re-tuned now and see the improvments, last tune was 18-24 months ago.

Thanks to all who replied

  • 1 month later...

I'm about to do my exhaust manifold gasket and studs (new OEM parts)

Just wondering if I'm forgetting anything.. I have a t04e high mount and should I redo the gaskets on that as well? Rb20det..

And yes, I know. Shit turbo.. Still don't want to re-use gaskets if I shouldn't..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...