Jump to content
SAU Community

Moving To Vic Next Year, Have A Few Questions


Recommended Posts

Hey folks, I am moving from the ACT to Melbourne next year and had a few questions that some of you can hopefully help out with.

Registration wise, if I am bringing a car from interstate to Vic do I have to go to an rta inspectation station or do I just go to the same place locals get theirs done at? Also related, do you guys have to get yearly inspections like NSW or do you have a similar system to the act where you get inspected when you first get the car then don't need an inspection any more unless you get defected or rego lapses?

Police wise, what are the police like with imports? In the act unless you a driving like a tool or your car clearly looks like its in breach of the law they will normally leave you alone. Is Melbourne similar or are the police quite strict?

Sau wise do you folk have weekly meets somewhere?

Also any other information you think might be useful would be awesome.

Thanks in advance for any answers regardless of them being helpful or not.

Edited by azathoth

In Victoria, we have VicRoads, which is our equivalent of your RTA. You only need an inspection (and therefore RWC) during first registration in our state, transfer of ownership, or to clear a major defect / notice of unroadworthy.

SAU Vic hold monthly meets open to members and non-members. We have member only events too. People on the forums do organise their own events too, though not so much during the colder months.

Police attention is random and depends largely upon where you live or travel through. Don't let someone tell you that if you drive sensibly, in a car that doesn't draw attention, then you will be cop free...because they are likely inexperienced and/or lucky. It is true that doing these two things will improve your chances of being left alone, but we are the defect state for a reason. People do get hassled in standard imports and defected/fined for something arbitrary; people also get ignored in loud shitboxes with chrome bits hanging off. It's luck of the draw sometimes, and the area / the kind of cop you come across both have a lot to do with it. If you're driving an import here, do so with the expectancy to have a run in at some point and you will have no nasty surprises :)

Thanks for the help folks.

I would bring fireworks if I could, the fun police took them away from us years ago. It made peoples dogs bark or something.

Decat + Ignition Cut Rev Limiter + Flame Show...

We do what we can to bring the fun back into this crazy world...

You don't need a RWC certificate unless you are transferring the car to someone else's name. You'll just need to make an appointment with Vicroads to get the car registered as per:

http://www.vicroads.vic.gov.au/Home/Registration/NewToVictoria/InterstateVehicleRegistration.htm

Thanks for that link. Does the appointment include an inspection or is it just sitting down at a desk and filling out forms and handing old plates in and getting new ones?

Sorry about the ignorance :3

ACT laws are the only ones I have ever known haha

if you can keep ACT rego, i'd suggest keeping ACT rego.

You can only keep rego for like 3 months though man, after that the police can fine you for not transferring the rego over if you live in Vic permanently

You can only keep rego for like 3 months though man, after that the police can fine you for not transferring the rego over if you live in Vic permanently

"i'm here for work, i transit between ACT and melbourne about fortnightly"

what? they going to send someone to follow you around? not worth that 700$ mang.

happened to a mate and he got fined, car was still regoed in QLD and he got fined and told to transfer rego over :S

=(

seems like he met a dick of a cop.

drove the snorer on nsw rego till it ran out, no issues, mate from shitney is still driving his civic on nsw rego, no issues.

In terms of the rego - Im not sure if ACT is same as NSW but VIC rego is much cheaper and less of a hassle. No annual RWC required and cost is just over $700. If ACT is anything like NSW, then it maybe worth transferring. The only thing is the VIC laws (and enforcement) in regards to defects/mods/EPA's and the like are much stricter, so its abit of a risk.

Vic police cant fine you or driving an ACT regoed car if you have a ACT licence and the address is valid. The line as mentioned above is that you've got 3 months, but in reality as long as you are able to receive mail to the address on the licence and rego they cannot fine you for not transferring (well they can fine you - and probably will, but you would be able to quite appeal the penalty in court on the grounds that you legally still live at ur ACT address if you are receiving mail)

Hope this helps

Thanks for that, to be honest it will be a hassle to keep it for longer than three months. We are renting at the moment and i don't really want my mail to still come here.
I think it is about 800-900 for a full year here and that included the CTPI. In vic do you pay rego yearly or can you do like here with 3/6/12 month increments? No yearly inspection is good, that is like here.

I am not too worried about the police, i am not the sort that does things to attract attention but just in case, i am already changing things to make it look more sedate, changing my BOV to a plum back, getting a return flow IC and going to paint it black so it's harder to notice and getting a box for my pod. My exhaust is actually a few DB quieter than legal here so i should be fine with that.

Are coilovers legal in vic as long as they are at or above legal height like here in the ACT?

Thanks for all the help again folks.

I'm looking forward to joining up with SAU Vic once i'm down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This is the territory of the "Stage 1/2/3 Golf GTI/R" or otherwise off the shelf tune with (relative to before) minor mods. It's easier now. Downpipe and Tune and boom, big increases. Stage 1 OEM+ is where it's at. This is where the niche evolved into and it's really easy to see why. It's rare to even NEED to consider changing turbos or going to aftermarket ECU's or building bottom ends for more power. Stage 1-2-3 will get you a LONG WAY. Civic Type R turbo GR Yaris/Corolla Anything with B58 (MKV Supra/x40i) Anything BMW in General Anything Audi in General Any turbo AMG RenaultSport Turbo offerings Korean Elantra N/I30N Ecoboost Mustangs Focus RS? List goes on. I would argue in the future it won't even need to go on... M3P is pretty rapid out of the box...
    • There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
    • Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
    • Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
×
×
  • Create New...