Fs: Dba5000 2 Piece Rotors 324Mm

[hellaflush7]

DBA5000 2pc 323mm x 46mm x 24mm - extremely good condition. Came off my RX8 but will suit any 5x114.3 (direct R32/R33 GTR bolton or can be used with GKTech GTR dogleg caliper adapter kit on S/R chassis) setup though with appropriate caliper spacers. $600

[DattoP510]

Where are they and what part number?

[Ben C34]

Seems like a good price good luck with sale, but I wouldn't assume they would fit any car with same stud pattern. That would make buying discs way too easy!

[hellaflush7]

They will fit same stud pattern... you will just need to ensure that you have caliper height to suit. GTR will be direct fit. S chassis and R chassis non GTR will need R33 calipers and the GKTech Dogleg caliper adapters which will space the calipers to suit 324mm diameter rotors.

Located in Adelaide. Can post (prolly be 50 bucks due to weight?)

[Ben C34]

could uou post the part number so people are be able to check to see if they will fit.

I, I would be seriously suprised if nissan and mazda used the same size discs. but I am ready to be suprised!

Edited October 16, 2013 by superben

[hellaflush7]

DBA52550BLKSL

Details: Diameter: 323mm; Height: 46mm; Thickness: 24mm; Minimum Thickness: 22mm; Center Hole: 72mm dia.; 5 bolt holes

[luke gtr]

gtr height is 54mm.

so, different offset.

will require adapters.

[GTSBoy]

Ah. Has no-one else spotted the fact that these skinny little things are only 24mm thick. GTR 324mm rotors are 30mm thick.

WILL NOT SUIT ANY NISSAN.

[hellaflush7]

Calm your farm lads. As stated, dogleg adapters from GKTech ($99) or make your own would be required to use R33 GTST or 32/33 GTR calipers on S or R chassis cars.

And skinnier isnt an issue considering they are 2 piece... -_-

Rather than chiming in with your 2 cents, maybe actually have some knowledge first off hey lads...

[Ben C34]

Skinner is a huge issue dude. How does being 2 piece change that? You can't make the disc fatter.

Edited October 16, 2013 by superben

[hellaflush7]

why is it a huge issue? calipers have pistons which compress... a few mm of thickness = less weight on already light large diameter rotors...

[Ben C34]

Fair enough. God luck with the sale, maybe someone will be happy to adapt then to fit.

[GTSBoy]

OMFG!