Jump to content
SAU Community

Recommended Posts

I have a series 2 R33 GTS-t, it has OEM keyless entry. Key looks like this

Posted Image

I think it also has some kind of receiver behind the door card

Thanks! Big help! The key I got was a re-cut from one of those GTR keys you can buy on eBay. Do you know if the S1 got these?

I have keyless entry. although my key looks heaps different to Cassbo's

You have an S1? I just don't know when they started using them... Ugh! It'd be nice to walk up and not have to try to fiddle with keys to get in. You can tell that a key has been used for some time to get in cuz of all the scratches around the key hole.

I searched all over several forums and could not locate the correct method to program the key buttons my '98 GTS-T, so after a few days of trying every combination of steps located on 240sx, 300zx, and infiniti forums I came up with this: make sure all doors are closed, get in and lock the doors manually, insert and remove the key from the ignition 6 times within 10 seconds, the doors should then unlock to indicate it is in program mode, turn key to acc. position (do not start!) and manually relock the doors, press the lock button on the key once, the doors should then unlock again to indicate acceptance of key code. remove key, then get out and close the door and test the lock/unlock buttons. if the above steps were followed in order, all should work correctly!

Above quoted from GTR.co.uk. Does anyone know if the S1 got a keyless option? Searching keeps bringing up S2 and it was a common factory option.

its a DEALER fitted item. they didn't come with keyless until S3. it will be FAR easier to add an aftermarket unit to the existing actuator that is there and remove that mess in the door.

as for coding it - dont bother.

its a DEALER fitted item. they didn't come with keyless until S3. it will be FAR easier to add an aftermarket unit to the existing actuator that is there and remove that mess in the door.

as for coding it - dont bother.

What I figured. Seems a lot of those remotes forgot to get on the boat with these cars. Aftermarket alarm it is..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...