Jump to content
SAU Community

Suspension, Brakes, Wheels And Tyres Upgrade


Recommended Posts

Hey guys,

Planning to do a suspension, brakes, wheels and tyres upgrade on my R33 GTR in the next few months. Here is what I'm thinking of so far:

Volk TE37SL 18 x 11

295 Semi-Slicks on all four wheels (still deciding on whether to go Kumho or Federal semi's).

HKS Hipermax 4 Suspension

Adjustable upper and lower control arms, roll center adjuster, swaybars, link pin and HICAS lock bar.

Project Mu 6 pot front and 4 pot rear brakes

Really looking to build a car that's quick around a track (but it will still be driven on the street). Pretty open budget, would prefer to go better brands / quality for a bit extra money. Any thoughts or suggestions?

Thanks.

Open budget...Hmmm

Wheels - Custom BBS/OZ forged magnesium wheels.

Suspension - Sachs, Aragosta, Bilstein Ennepetal, Ohlins (Euro), KW, custom MCA golds

Tyres - Michelin Pilot Super Sport, Pirelli P Zero

Your budget is way way above what I would want to spend but certainly not an open budget if those are the sort of brands/upgrades you're looking at :P

In the meantime, I'll keep dreaming :thumbsup:

Federal 595 RSR's are used as a street/light track tyre by many members, they aren't a true semi slick but they can also be used as a road tyre that wont wear out insanely fast.

As for suspension, don't go silly hard spring rates, our roads and race tracks in QLD are far to rough for hard suspension. Just go bigger sway bars to control body roll.

So far this is what is confirmed on the build:

Volk TE37SL 11" Rims

Whiteline 22mm Front Swaybar Adjustable

Whiteline 24mm Rear Swaybar Adjustable

IKEYA FORMULA Front Upper Arms

IKEYA FORMULA Front Roll Centre Adjustor Lower Kit

IKEYA FORMULA Rear Upper Arms

IKEYA FORMULA Rear Traction Adjustor Rod

CUSCO Rear Drag Rod

Here is what will most likely be going with the build (just looking into pricing at the moment):

Project Mu Billet 6 Piston Front Caliper Kit with 380mm Rotor Disc

Project Mu Billet 4 Piston Rear Caliper Kit with 345mm Rotor Disc

Still looking around at tyres and suspension.

Tyres, the Acilles 123Rs are hard to beat value for money or if you want full semis then the 050s or Z221 Hankooks

Suspension, pm Piggaz. He has just gone through all of the suspension dynamics for his R33 GTR and got a custom set of Bilstiens built

Haha t5iv, that cracked me up.

Nismo LM GT4 rims are currently what I have on the car but the rims aren't wide enough for the tyres I'm looking at. My mechanic recommended the Volk's and they are pretty much the exact look I'm after.

Haha t5iv, that cracked me up.

Nismo LM GT4 rims are currently what I have on the car but the rims aren't wide enough for the tyres I'm looking at. My mechanic recommended the Volk's and they are pretty much the exact look I'm after.

I am quite funny. Do you have a Gts-t and a GT-R?

Sounds like this thing is going to handle quite well. When are you planning on having all this done? Will she still be coming to the Charity Cruise?

Nah I had a Gts-t but it broke down constantly so I got rid of it. Only recently bought the GTR (had it for about 6 months now). Most of the parts are on order but some of the stuff won't be here until the end of January (so end of Jan / early Feb is when all this will be going on). Havn't even looked at the Charity Cruise to be honest. When is it?

Nah I had a Gts-t but it broke down constantly so I got rid of it. Only recently bought the GTR (had it for about 6 months now). Most of the parts are on order but some of the stuff won't be here until the end of January (so end of Jan / early Feb is when all this will be going on). Havn't even looked at the Charity Cruise to be honest. When is it?

8 December mate. Would be great to see you out there!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...