Jump to content
SAU Community

Recommended Posts

Let us know your thoughts on the dog box after you have a drive with one Piggaz. I'm going to be in the same boat as you and am not sure about driving with one on the street.

CHeers

Edited by Chris32R

ppg straight cut dogbox would be epic.

Would be, but still being a road car I want a helical 5th for freeway use so it'll be helical

dogs.

Let us know your thoughts on the dog box after you have a drive with one Piggaz. I'm going to be in the same boat as you and am not sure about driving with one on the street.

CHeers

Will do. Either way, decision is made so ill just have to learn.

What's your setup?

They are easy on the street. To be honest, they do take a week or two to adjust to the new style of changing gear and the change in speeds you get in each gear. If i push mine to 8000rpm my speedo just nudges 100kph in first gear! Power levels, final drives and tyre size do affect this. .

Once you get the hang of no clutch, you will never want to go back a synchro box. You realise they are purely for comfort and that is it!

They are easy on the street. To be honest, they do take a week or two to adjust to the new style of changing gear and the change in speeds you get in each gear. If i push mine to 8000rpm my speedo just nudges 100kph in first gear! Power levels, final drives and tyre size do affect this. .

Once you get the hang of no clutch, you will never want to go back a synchro box. You realise they are purely for comfort and that is it!

Can you downshift easily with no clutch while braking or do you have to use the clutch? I suppose the latter because the box would be loaded up under braking?

Also, how does power level affect RPM/speed ratio in any way? - Unless of course your clutch is slipping!

Can you downshift easily with no clutch while braking or do you have to use the clutch? I suppose the latter because the box would be loaded up under braking?

Also, how does power level affect RPM/speed ratio in any way? - Unless of course your clutch is slipping!

No, you can down shift without the clutch if you heel toe correctly and match the revs. The slight blip of the throttle counteracts the deceleration force to unload the dogs to allow it come out of gear. As you go through neutral, the throttle blip will speed up the gearbox internals to the same speed to allow them to engage without clunking, banging or simply not going in.

The way a dog box work vs a synchro is very different.

Power affects it slightly. More power means more force. More force means more output. More output means more speed.

For example, at one power level i got 10kph/1000rpm in 1st gear. After adding 100awkw and changing nothing else, i get just over 12kph/1000rpm in 1st gear now. So it isnt a huge factor in terms of how it affects your speed. tyre size and final drive would make more noticeable differences.

No, you can down shift without the clutch if you heel toe correctly and match the revs. The slight blip of the throttle counteracts the deceleration force to unload the dogs to allow it come out of gear. As you go through neutral, the throttle blip will speed up the gearbox internals to the same speed to allow them to engage without clunking, banging or simply not going in.

The way a dog box work vs a synchro is very different.

Power affects it slightly. More power means more force. More force means more output. More output means more speed.

For example, at one power level i got 10kph/1000rpm in 1st gear. After adding 100awkw and changing nothing else, i get just over 12kph/1000rpm in 1st gear now. So it isnt a huge factor in terms of how it affects your speed. tyre size and final drive would make more noticeable differences.

Cool that makes sense. So to downshift without the clutch you would be braking into the corner, jab and hold the throttle with your heel and then swiftly put it into the next gear?

I understand the difference between how they work, just wondering what driving styles work and don't work.

I believe you can drive a dog box like a synchro box, ie) clutched shifts etc. but you must be affirmative with the gear changes. (See PPG how to drive a dogbox video)

However, you obviously can't drive a synchro box like a dog box, as the synchros won't let the shifter slam between gears without being rev matched.

I still disagree with your statement that more power = more speed unless you have some technical description.

Everything is meshed in a manual box, so assuming there is no slippage the crankshaft speed is locked to the wheel speed.

Wheel rotations per minute is always going to be equal to something like =

RPM x clutch slippage factor / gear ratio / final drive ratio

There is no way I can see that more power can produce a higher wheel rotational speed at a given RPM.

Additionally, you are not using any more power to maintain 10k/1000rpm now than you did before, the amount of power used would be exactly the same, but the throttle position might be different to maintain the same speed.

Edited by Jazzadub

Straight cut dog box will be annoying on a street car - unless you love the loud sound of the whining gears. Not sure how loud the whine is on the straight cut PPG, but the Trust straight cut dog box is very loud. Doesn't help if you have a quiet exhaust either. Let me know when you meet up to test drive the PPG (if you haven't already) as I would like to compare and might swap to a PPG and leave the Trust to the race car.

Straight cut dog box will be annoying on a street car - unless you love the loud sound of the whining gears. Not sure how loud the whine is on the straight cut PPG, but the Trust straight cut dog box is very loud. Doesn't help if you have a quiet exhaust either. Let me know when you meet up to test drive the PPG (if you haven't already) as I would like to compare and might swap to a PPG and leave the Trust to the race car.

Charlie, unless you want straight cut 1-5 (straight cut 5th would get annoying on the freeway), PPG only do a helical 1-4 helical dog with a synchro 5th (standard ratio if you wish).

I still haven't met up with Sime, is the helical dog something you're interested in?

Unfortunately, I don't think the helical will handle what I have to throw at it. The straight cut box will end up costing close to what an OS Giken sequential will (Well, close enough to make the OS Giken Seq. a viable option) The OS G is also helical cut and can handle 1500hp.

Unless you need dog 5th, helical dog 1st-4th is the best for the street because it doesn't make any noise.

After the first couple of months hating life that you just blew a shit load of money on something noisy you can't drive, come and talk to me once that's over and let me hear how you'll never want a synchro box again. Ever.

They are the ultimate.

Unless you need dog 5th, helical dog 1st-4th is the best for the street because it doesn't make any noise.

After the first couple of months hating life that you just blew a shit load of money on something noisy you can't drive, come and talk to me once that's over and let me hear how you'll never want a synchro box again. Ever.

They are the ultimate.

That's what I keep hearing!

What's in yours, Paul? 1-4 helical or 1-5 straight cut? I've seen a few of your vids, particularly at Coota. You're not nice to them at all!

Helical dog 1-4. I broke a selector after over 30,000k's, and replaced a few bits from it last year, that was 6 years worth of abuse that you've seen on those videos. It's the only way the car gets driven, and I might add that both the guys who work on the car had been learning to drive on it as well.

When I broke the selector it was partially my fault, but most of the wear would have been caused during the initial period of me getting it together.
It does take time to learn though, you can't just jump in one and think you're Fangio, it will bite you in the arse and if you are offered a test drive, you're wasting your time unless someone experienced is in the driver seat.

That's decent!!

What have you done for a 5th gear? Still the standard unit? How often are you up 5th? I'm a bit frightened to bust it.

It's stock, I used to worry about busting it but I did the Snowy Mountains 1000 and had 5 passes into 5th, certainly reminds you how much you hate synchros when you go to shift in 5th fast.

  • 2 months later...
  • 2 weeks later...

After months and months of research, I've decided to go the OS88. Went for a drive in one and it was awesome. Quiet in gear, bit of clunking between gears but who cares about that, 4 choices of ratios and 6 speed. It also bolts straight into a R33 GTR so no shaft/transfer case changes.

It won't happen this year, but it'll happen. :)

Won't that be a bitch to drive on the street though?

Meh, I'll live. It's just different.

It ain't a daily, when I take it out I'm giving it a hard time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...