Jump to content
SAU Community

Recommended Posts

I have had the 3.0 in my 34 making 400kw+ for near a year now with two trips to the drags and a trackday at EC with no issues, but I am very mechanically sympathetic

This is a debate I had with Paully for ages when he was going to go the PPG, by the time you pay for the PPG set and have it fitted and you really need to have the Billet mid plate, you are better off saving a bit more and getting the sequential, unless there is a class restriction that requires a H pattern in which case the PPG box is the one to have

The problem with the aftermarket gearsets is they still go into a casing that wasn't designed to take that much power and flexes and due to size can't run bigger diameter gears, where the OS88 has 88mm centers and is purpose built to take upto 1500hp plus you get much faster gear changes, especially with shift cut setup :D

As for legalities, There is some crap about the shifter knob has to show the shift pattern I'm sure they could get you on of they wanted to.

Piggaz that's a fair wait for the box how does it work as in how much of a deposit you have to put down to get the ball rolling for one? If you don't mind me asking how much did one cost you?

The whole lot was the deposit, have to pay up front then wait 4 months or more for it to get here :(

It's ok for me my car is still running, but poor Paully has to sit and wait :(

Hopefully not to much longer now mate, if Paully wants to post the price he can

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • No. Only for a standard ECU with/without Nistune. Standalone has no need for it. That's like the 3rd time I've said so.   And as to that sensor linked - yes, it does look like it would be the right one. I've never bothered to see how available they were - just assumed that they'd be hard to find. I think I'd be planning to go Link ECU rather than buy sensors I don't actually want to make Nistune work, if I did not already have Nistune. As you do not already have Nistune, you should realy consider your options.
    • If there's enough meat in the housing where you want to put the M12 adapter, then do it, but be aware that if/when you f**k that up you'll probably be repairing it before doing anything else. I'd just drill it out and tap ina 1/4" thread. No need for rocket surgery when the next most obvious thing will do. You could throw a 1/4 x 1/8 bush in there and use the same fitting you intended to use.
    • Is the only issue that the oil catch can is getting filled on hard runs? I'd be thinking more about oil control issues rather then the head lifting, especially as you aren't seeing spiking in the coolant pressure.  Do you need restrictors in the head, or better drains from the head? Does the sump need venting to the catch can?
×
×
  • Create New...