Jump to content
SAU Community

Recommended Posts

Hey guys, I'm contemplating selling my evo, some say there car is "capable" of making 500kw, but it's on 240kw, all u need to do is spend another 30k to get there but it's "capable" , this is one of those evos that have made the power it's capable of, and a lot of money, and time has gone into this car, well over 80k not exaggerating... If I sit and count what the parts cost plus labour it would be over 100k... And it's got the best of the best gear in it.. Rarely get driven, the only thing left stock in this car is the 6 speed box and diffs, it has 9 months nsw rego. Less than 1500km ago, Engine has been refreshed with new bearings, gaskets, etc, head has been refreshed as well. New complete precision turbo set up, new brake pads, new clutch, new tyres... Spent over 25k in the last 3 months.. So here's the mod list

price is $46000

PICS ARE HERE

http://s1037.photobu...s?sort=3&page=1

Car was built by ChasersMotorworks in Melbourne if you want to know a bit more about the history feel free to call them.

Engine Modifications:

- HKS 2.3L forged stroker kit. - engine opened up and refreshed with new bearings, gaskets, etc 1500km ago

- Precision 6466 turbo with custom powertune manifold- 1500km ago

Turbo smart wastegate 1500km ago

M&w ignition 1500km ago

5bar map sensor

- HKS type R intercooler kit

- HKS type R oil cooler kit

- Id 2000 injectors

Big fuel setup and surge tank, braided fuel lines

- Tomei adj. cam gears

- Tomei Procam 270/270

- Hypertune Intake manifold

- Hypertune throttle body

- Tomei fuel rail, braided fuel lines

- Sard fuel regulator

- PWR 57mm radiator

- Ferrea oversize valves, guides, springs,

- Solid engine mounts

- Heavily ported, machined, polished head- 1500km ago

- Motec M800 ECU

- Tomei Sump baffle

- Solid lifters

Suspension/Handling Modifications:

- Ohlins Flag L coilover suspension w/external res

- Alcon monobloc 6piston 365mm front brakes

- Alcon monobloc 4piston rear brakes

- Rose jointed

- All aftermarket suspension arms

- Adjustable sway, camber, toe, castor, bump, rebound etc

- Summit tower brace

- Summit boot bracing

- In cabin floor bracing

- Under car bracing

Drivetrain modification:

- Cusco front and rear Differential LSD's

- ORC twin plate carbon clutch

- Rays RE30 10.5x18 wheels

Yokohama AO50 semi slick. 265/35/18 driven only 3 times with these new tyres

Eboost 2

Oil pressure and oil temp gauges

Evo 9 front and rear bars

Varis side skirt

Varis rear wheel arch to tuck in the 10.5 wheels. Otherwise they will be sticking out like dogs balls.. The car had a time attack body kit on it which I took off but had to leave this only for the wheels.

Body is in good condition. 1 dent on it on the door. Some scratches on the bottom lip.

Interior is standard trim

This car is nuts to drive, it comes on like a motorbike, and handles like it's on rails, and with the Alcon brakes, it stops as hard as it pulls! Well not really but I haven't tried yet.. lol..

It's tuned on e85 and made 515kw @ 40psi, can make more power with another fuel pump, but I think 515kw is more than enough on the street.. It was tuned at maatouks racing.

Car is located in burwood, nsw please call 0410158440

Price is $46,000 a bargain considering the amount of work, and money poured into this car.

PICS ARE HERE

http://s1037.photobu...s?sort=3&page=1

Edited by rami13b, Today, 10:38 PM.

post-86797-0-43163200-1386245479_thumb.jpgpost-86797-0-58918000-1386245490_thumb.jpgpost-86797-0-44387800-1386245501_thumb.jpgpost-86797-0-48020300-1386245520_thumb.jpg

No gt-r madness, you read wrong, my point is that there are people who advertise there car as "capable" of making 500kw plus.. This makes what it is capable of making, 100k has been spent on this car,

But if you think a turbo kit and stroker kit will get you 500kw think again, you will need another 30k.. That's what my point was..

Both links come back to this page.

Pics in duplicate thread here
http://www.skylinesaustralia.com/forums/topic/435995-2004-evo-8mr-with-515kw-at-the-wheels-100k-spent/

Edited by timmy_89

I didn't read it wrong... it's currently 240kw and the car had 100k worth of parts and labour.. and the standard Evo's have like early 200kw... I just find it hard to believe that's all...

Edited by GT-R Madness
  • Like 1

Yes you did read it wrong, I wrote...

" some say there car is "capable" of making 500kw, but it's on 240kw, all u need to do is spend another 30k to get there but it's "capable" , this is one of those evos that have made the power it's capable of"

Some say, as in, some people selling there evos claim that there 240kw is just moments away from 500kw, and in reality it needs another mortgage to achieve this power...

Then I wrote, THIS IS ONE OF THE EVOS THAT HAS MADE THE POWER ITS CAPABLE OF

Did you still not read it right?

post-86797-0-91840700-1386318840_thumb.jpg

^ and there's the proof , If this is still up in a few months and house hunting is finally done i will contact you :)

Edit : here is his photo's link for those not working

http://s1037.photobucket.com/user/rami_13bz/library/Mobile%20Uploads?sort=3&page=1

Yes you did read it wrong, I wrote...

" some say there car is "capable" of making 500kw, but it's on 240kw, all u need to do is spend another 30k to get there but it's "capable" , this is one of those evos that have made the power it's capable of"

Some say, as in, some people selling there evos claim that there 240kw is just moments away from 500kw, and in reality it needs another mortgage to achieve this power...

Then I wrote, THIS IS ONE OF THE EVOS THAT HAS MADE THE POWER ITS CAPABLE OF

Did you still not read it right?

attachicon.gifimage.jpg

I understand what you mean, but this was a very unclear way of saying it.

What makes it so difficult for people to understand, is you meant to write "their car", but what you actually wrote was "there car".

"There car" does not fit in the sentence, so people start wondering does he mean "their car", "the car" or "there car". If you do not use the right word it makes it difficult to decipher what you mean.

  • Like 2
  • 1 month later...
  • 3 months later...

Can I suggest rewrite the ad. I also initially read it wrong which made me laugh while reading. How many other people have read it incorrectly and moved on from your advert.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...