Jump to content
SAU Community

Recommended Posts

  • 2 months later...

Now on the quest for new wheels, as my current wheels have about a cm of poke at the front and require about 3 deg of camber at the rears.

Looking for F - 18x8.5 + 25 and R - 9.5 + 30, I believe these will be flush and fit 245/275 tires with minimal camber.

Any input from anyone? Offsets seem ok?

  • 2 months later...
  • 1 month later...

Cheers guys.

18 x 9.0 +35 (with a 10mm spacer to clear brakes) and 9.5 +38

245 and 265 tyres, KU39.

Next is sway bars front and rear I'm thinking, getting a terrible knock from my front end which I believe might be a sway bar end link :angry: Then maybe a 1.5 Way and then I'll finally get onto power..

  • 4 weeks later...

Well I had my first track day..

Oil got to 130 deg after 2 laps, and water started to get close to the top of the dial after 3 so I had to backoff and let the car cooldown for 15 mins after every two laps, annoying to say the least!

So next up is a new china radiator + mocal oil cooler, which will require battery relocation and new washerbottle/catch can :)

Vid incoming of my terrible driving.

  • 10 months later...

^^ Agreed, looks great!

Sliding around is always fun, looks like you're getting the hang of it, nothing helps more then practice :) . Then you can work on transitioning between the corners :P

How did you end up going with the radiator and oil cooler?

^^ Agreed, looks great!

Sliding around is always fun, looks like you're getting the hang of it, nothing helps more then practice :) . Then you can work on transitioning between the corners :P

How did you end up going with the radiator and oil cooler?

Bought a 42mm ebay rad and put that in, I have a Greddy Oil cooler + Block sitting in my shed but yet to put it in yet as I'm probably going to sell the car soon and buy an Evo IX.

Temps were fine on that track day although it was only 17 deg, oil sitting at 110 deg after 3 hard laps and water was fine. I'd say I'm going to need the oil cooler for summer track days if I end up keeping the car.

Edited by owen1r

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...