Jump to content
SAU Community

Recommended Posts

Turbo guru's, do you think this would fit it?
http://www.ebay.com.au/itm/Turbine-Housing-Kinugawa-Garrett-GT3071R-GT2835-A-R-73-10cm-56-5mm-Trim84/291020897812?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D261%26meid%3D3436767607632936440%26pid%3D100005%26prg%3D1088%26rk%3D2%26rkt%3D5%26sd%3D291034391697%26

Or even this one?
http://www.ebay.com.au/itm/Turbine-Housing-Kinugawa-Garrett-GT3071R-GT2835-56-5mm-Trim-84-A-R-61-8cm-T3-/291034391697?pt=AU_Car_Parts_Accessories&hash=item43c3006491

As far as i know the HKS gt2835 has these specs
TURBINE:
-Wheel- 84 Trim - 56.5 Major / 51.8 Exducer
-Housing- T3 inlet / Outlet spec:
-0.68 AR (Mine is 0.68,not 0.87)

Kinugawa housing
A/R 73 10cm Turbo Turbine Housing ( Fit 56.5mm Trim 84 Wheel)


Here is the my turbo id tag
HKS%20GT2835%20Pro%20S%20tag.jpg

Edited by R31 POWER

a friend of mine got one for his gt35r and it looks pretty good, he said the exhaust wheel just just touches inside and it needs MINIMAL machining.

still worth buying for the gains you get for going to a small housing imo.

I have modified quite a few of those Kando housings to external gate. They are great housings and flow well.

I even have one on the bench here if you want me to take measurements, or you could make an offer on it. ;)

Just get Stao to machine it out to suit.

Am using one of these housings with a 3076R, and have seen another car using one with the same turbo.

Performance is exactly as expected. Fantastic value for money... Much cheaper way of getting a v-band rear housing than buying garrett.

Sounds promising :D

Reason for asking is im thinking of going 6boost low mount. I really dont want to hack up the rear housing/ beautiful dump haha.

ARTZ, it does have a hairline crack yeah. I noticed it when i got it rebuilt a couple of years ago.

Scotty nm35, which ar housing do you have? I was looking at doing what AngryRB did to his housing!

http://www.skylinesaustralia.com/forums/topic/426934-angryrbs-r33-street-sweeper/page-2

Sounds promising :D

Reason for asking is im thinking of going 6boost low mount. I really dont want to hack up the rear housing/ beautiful dump haha.

ARTZ, it does have a hairline crack yeah. I noticed it when i got it rebuilt a couple of years ago.

Scotty nm35, which ar housing do you have? I was looking at doing what AngryRB did to his housing!

http://www.skylinesaustralia.com/forums/topic/426934-angryrbs-r33-street-sweeper/page-2

yeah have seen them cracked...its ok until you pull it off and it shifts...

Thats exactly what Scotty did to my kinugawa housing....sits on stock manifold and works well, no need for a 6 boost really as the stock manifold will handle what that turbo can put out.....just tell him you want what artz has ;)

but i dont think the housing he has will fit gt30 as its a t67 housing...maybe it can be milled out not sure...

WP_001535_zpscbd6d49e.jpg

I think it runs the same housing as yours doesn't it Artz? It was from Stao originally, came on a T67 billet turbo (bigger compressor only I think, I can check with Hypergear) with the .73 rear in T3. It was removed due to needing a T25 flange housing and has never been used.

I can do an external gate off this one and send it up if you like, if it is suitable for machining to match your turbine.

Angryrb had a split pulse manifold and turbo, requiring the wastegate to be split also. I helped him design the split single gate setup off the housing but it was much more complex than Artz housing above. I assume from your housing choice you were looking at a T3 manifold? Artz is correct in saying the stock manifold will flow the numbers...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...