Jump to content
SAU Community

Recommended Posts

Event:
Super Sprints at Queensland Raceway

Description:
This is a super sprint day and our first of several for 2014. You will get 3 sessions of 5-6 timed hot laps around QR.

This is a full track day.

There will be practice laps from 9:30 am through 12:00 pm.

We will then have a break for lunch.

At 12:30, we will be briefed and then onto the track for our laps.

After the success of our last track day I'm expecting this one to be just as entertaining.

Location:
Queensland Raceway

Date:
Sunday 2nd February 2014

Time:
Be there by 8:45am for a 9:30am start.

Cost:

$150 for members
$175 for non-members

You will need a timing chip which can be either bought from QR or rented for the day. They cost $80 to purchase and can be used at any timed event held by QR. You can rent them for $20 for the day with a $60 deposit which will be returned to you at the end of the day.


This has been ridiculously well priced. When you consider that the open sprints alone are $175. You're getting a 3 hour practice + 3 sprint sessions for $25 less. Bargain!


There are only 20 spots available.

From today until the 11th of January, we will be releasing the event to members only on a first in best dressed basis, after this date, we will open the remaining spots to anyone. If you reserve a spot but haven't paid and submitted your entry form by the 21st of January your spot is fair game.

So if you want to guarantee a spot get in quick.

If all 20 spots are taken we will start a reserve list of people to take anyone's place if they have to pull out for any reason.

This will be a great way to get some practice under your belt before the QLD v NSW State of Origin Track Day. :)

Requirements:

  • Completed Entry Form and Money paid by due date.
  • Helmet
  • Timing Chip
  • ABS & SRS systems may be disconnected at the driver's option
  • Drivers must wear non-flammable clothing that fully covers the body from ankle to wrist to neck
  • If vehicle is road registered or road registerable must meet the roadworthy requirements of Qld Transport
  • If vehicle is not road registerable it must meet the applicable Racing Car standards below
  • Fire extinguishers, when fitted, must meet AS1841 standard and be secured to ensure they cannot injure the driver in the
  • event of an accident.
  • Tyres must be fit for purpose, not recut or retreaded, and be fitted to rim widths that comply with the Tyre and Rim
  • Association manual and/or ADR requirements
  • Rear facing red lights for use during rain must be fitted.

Application Form - Click!

Link to comment
https://www.sau.com.au/forums/topic/436456-sprint-day-20214/
Share on other sites

Double check dates in the Post Tony, you said "From today until the 1st of February we will be releasing the event to members only on a first in best dresses basis, after the 1st of February we will open the remaining spots to anyone. If you reserve a spot but haven't paid and submitted your entry form by the 1st of March your spot is fair game." But event date is currently SUnday 2nd Feb :)

Double check dates in the Post Tony, you said "From today until the 1st of February we will be releasing the event to members only on a first in best dresses basis, after the 1st of February we will open the remaining spots to anyone. If you reserve a spot but haven't paid and submitted your entry form by the 1st of March your spot is fair game." But event date is currently SUnday 2nd Feb :)

Don't know what you're talking about. :ninja::P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...