Jump to content
SAU Community

Recommended Posts

so, my r33 runs too rich, and when i connect computer to the r33(below the steering wheel) and run the error codes it says o2 sensor is fried (code 13) but i tried changing it (to original sensor from friends car) and it still runs the same and still gives error code and i get like 0.7-0.8 V max (program shows) and my water temp in the dashboard isn't working at all, it doesn't rise at all, so i tried to clean the water temp sensors (both the ones that goes to ecu and the one that goes to dashboard) still nothing the one that goes to ecu shows some Resistance (ohm) and changes as the temp goes down so i guess it at least is working, but then i found 2 empty adapters or whatever they're called and i followed the wires from the o2 sensor and they go through this adapters anyone knows what these are or where they belong (just bought the car) or any ideas what to do next?.. pics below ZAknhX3.jpg

MJhPok4.jpg

Link to comment
https://www.sau.com.au/forums/topic/436487-r33-gts-t-runs-too-rich-unstable/
Share on other sites

What are the resistance value you get on the ECU sender ?

Does the engine actually get the radiator and hoses hot or they just stay warm ?

Is the hoses to the FPR plugged right and/or in good shape ?

It could be a lot of things, bad engine temp sender, blown fpr or fpr not connected, thermostat stuck open preventing the engine to warm...

What are the resistance value you get on the ECU sender ?

Does the engine actually get the radiator and hoses hot or they just stay warm ?

Is the hoses to the FPR plugged right and/or in good shape ?

It could be a lot of things, bad engine temp sender, blown fpr or fpr not connected, thermostat stuck open preventing the engine to warm...

if i remember right the resistance was about 1.6 ohm or something, from the 2pin ecu sensor, hoses are in pretty bad shape, i changed a couple ..when i squeeze the radiator hose on the left side of the engine (from radiator to engine) i hear kinda "leaking" sound from behind the engine , the radiator and radiator hoses stay "warm" not "hot" i can touch them with your hands and not get burnt at all, how do i check if my fpr is blown and how to check thermostat, should i remove it and take a look? soon i'll drive this piece of shiaaat off the cliff...

Edited by Miksu

so, my r33 runs too rich, and when i connect computer to the r33(below the steering wheel) and run the error codes it says o2 sensor is fried (code 13) but i tried changing it (to original sensor from friends car) and it still runs the same and still gives error code and i get like 0.7-0.8 V max (program shows) and my water temp in the dashboard isn't working at all, it doesn't rise at all, so i tried to clean the water temp sensors (both the ones that goes to ecu and the one that goes to dashboard) still nothing the one that goes to ecu shows some Resistance (ohm) and changes as the temp goes down so i guess it at least is working, but then i found 2 empty adapters or whatever they're called and i followed the wires from the o2 sensor and they go through this adapters anyone knows what these are or where they belong (just bought the car) or any ideas what to do next?.. pics below ZAknhX3.jpg

MJhPok4.jpg

Yep Pic 1 is Auxilary fan plug

Second plug is stock boost solenoid plug

You need to get your Water temp sensor (for the ECU) working properly or the thing will run rich all the time. The O2 sensor is only really used on cruise/light throttle, so will not affect the fuel as much as the ECU thinking the car is always cold

ok, now both sensors are working and car doesn't run nearly as rich BUT the water temp gauge doesn't even go where it supposed to be (half way on the gauge) it goes like 35% up and stays there, even if car were running for like half an hour it stays too cool? Is that a problem? and when i squeeze the pipe on the left side which goes to the radiator, i hear a "leak" like noise from somewhere and if i squeeze long enough you can see air bubbles start coming from the coolant liquid container cause it's see through.. ps the pipe is warm not hot and is easily squeezable (very soft) feels like there is no pressure at all inside. should there be? there's no more "sailing" on idle.

it goes like 35% up

Is there a thermostat installed? If so, it may be stuck open or it may be a low temp one. If not, fit one.

if i squeeze long enough you can see air bubbles start coming from the coolant liquid container

This sounds like your radiator cap isn't sealing properly. The outlet to the reservoir should only open if the pressure reaches the cap's rated pressure. Try a new cap.

  • 2 weeks later...
ok so , now engine warms up like it should and stays cool after thermostat change , now i have black smoke coming out of exhaust (didn't happen before t-stat change), and a strange noise from crank angle sensor or something it didn't have cover before and there was no noise, now i installed a cover and now it gives me strange noises.. any ideas? and i found out i have r32 ecu

black smoke here :


strange noise here:


Edited by Miksu
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...