Jump to content
SAU Community

Recommended Posts

Hey,

Last night when i was installing my ebc, i had the 2 inside lights on and i forgot to turn them off :D So this morning i woke up to my car alarm system going off, i ran to the car and try to unlock the door but it wasnt working, then i saw that the blue which wasnt flashing, so i unlock the door using the key and try to start the car nothing turn on :( no light nothing then i saw the 2 lights switch on the inside on.... NO!!!!

Anyway im going to try and jump start the car 2night, but i really need my car 2morrow i have an exam, can anyone requirment a place to go to get a new battery and what type? In the magla area would be the best thanks

Mike

Link to comment
https://www.sau.com.au/forums/topic/43657-my-battery-went-flat/
Share on other sites

1 hint, dont jumpstart the car from the battery in the boot.... :(

there is points there are marked out in the engine bay with the fuses and stuff :D

Hey,

Last night when i was installing my ebc, i had the 2 inside lights on and i forgot to turn them off :( So this morning i woke up to my car alarm system going off, i ran to the car and try to unlock the door but it wasnt working, then i saw that the blue which wasnt flashing, so i unlock the door using the key and try to start the car nothing turn on :( no light nothing then i saw the 2 lights switch on the inside on.... NO!!!!

Anyway im going to try and jump start the car 2night, but i really need my car 2morrow i have an exam, can anyone requirment a place to go to get a new battery and what type? In the magla area would be the best thanks

Mike

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...