Jump to content
SAU Community

Recommended Posts

I have Tokico oem replacement shocks, Eibach 1.5" lowered heavy duty springs and Godspeed adjustable front and rear swaybars. I have also changed my lower control arm bushes to Nolathane, changed the lower ball joints to Megan Racing versions and have SPC adjustable rear camber rods.

In my experience coilovers for the V35 are much harder than stock, and for daily duties stock items are firm enough for my liking. I ran some cheapy Chinese adjustable coilovers for a time, and they were utter shite compared to the setup I have now.

I have Tokico oem replacement shocks, Eibach 1.5" lowered heavy duty springs and Godspeed adjustable front and rear swaybars. I have also changed my lower control arm bushes to Nolathane, changed the lower ball joints to Megan Racing versions and have SPC adjustable rear camber rods.

In my experience coilovers for the V35 are much harder than stock, and for daily duties stock items are firm enough for my liking. I ran some cheapy Chinese adjustable coilovers for a time, and they were utter shite compared to the setup I have now.

Hey Andrew, im in a big hesitation whether or not buying a camber kit from Godspeed. I heard versatile feedbacks from these Ichiba replica. Some say its s*** some says its worth buying some says you pay for wat u get n hence its each to their own. I intended to buy also the GSP front n rear sway bars but then one gud used Hotchkis set came up n i bought it. Now im about to upgrade my suspension n would like to get a nice camber kit to compliment. Would you recommend GSP ?

Thanks

Hi Justin, no I would not recommend Godspeed for camber arms. They are cheap, and for an integral component like camber arms you want better quality. I am perfectly happy with the GSP swaybars, but they are just a piece of tubular metal - not a threaded and adjustable item like camber arms.

Check on the Stagea forum. Dale (Daleo) sells Whiteline swaybars for V's as well as the various Stagea models.

He provides excellent service & cheaper than in stores afaik.

They made an amazing difference to my cars' handling.

I was in the market recently for suspension components and did quite a bit of searching/calling around - i'll give you a rundown of where I found mine in case it helps. They may be cheaper than pedders.

1) Whiteline swaybars from GSL RallySport - they had a promotion of 30% off the whiteline website RRP price over Xmas.

2) Whiteline end links from Dale - he gave me a great price!

3) Hard race camber kit - front + rear - Justjap.

4) BC Coilovers - Justjap.

5) Complete set of whiteline bushings, front + back - onlineautomotive. A good $10+ off whiteline RRP for each.

As to the handling improvements I can't say... I'm waiting for the swaybars to arrive until I install the lot. From what I've heard it's a marked difference.

Well whiteline are solid sways and OEM are hollow. I havent done sways yet, but i have driven a coupe with whiteline sways, BC BR coilovers and front and rear bracing and it was perfect!

I will get around to doing them one day

i have decided not to lower my car as i usually have passengers. I wonder if the whiteline sways still perform better than standard?

or maybe i shouldnt do it at all if i wont up grade my suspension?

I have a c34 so they're set up differently than your car. I've got thicker sway bars F+R and you could feel the weight difference. When i first drove it i noticed the difference in the first turn i took.

I was like you, i wanted better handling without lowering the car so i bought swaybars, and they did wonders! The car was setup perfectly for the street. Obviously I'm looking at lowering it and even better handling now.

Those with aftermarket Swaybars, any issues with aftermarket exhausts? I know the rear sway bar has one bend for the exhaust but wasn't sure how much clearance there is, say for example the Whiteline bars.

It would depend on obviously on the hangars and exhaust size, I'm yet to check clearance.

:-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...