Jump to content
SAU Community

Rb25Det Engine Rebuild

Billionaire_Project
 Share

Recommended Posts

Billionaire_Project Explorer

Billionaire_Project

Posted
Posted

Hey guys, a mate and I are starting a rebuild on his 33. Last engine threw a rod via big end fail, 3 holes in the block and a severely damaged block drifting at QR. M

Want some thoughts on this package, main goals are 300+ kW, it will be a drift/ street car but more drift, he does like to rev it quite hard.

Specs now:

3076 turbs

Wold 3d V500

540 injectors

Front mount

Stainless manifold

Full 3 in exhaust

Split fire coils

Fuel pressure reg, surge tank

Rebuild part list so far ( please give comments and thoughts, nothing is bought yet)

All ports matched to gaskets

N1 pump

New water pump

ARP main and head studs

Cometic gaskets

Cp pistons

Eagle or Manley rods

Tomei Poncams 256

Adj ex gear

Baffled, and larger sump

Oil cooler

All ports will be gasket matched, oil return line and ports enlarged/ cleaned up. Crank balanced, all pistons & rod will be balanced. Block needs to be bored and honed, still unsure about wether it needs to be decked. Any othe suggestions?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/438239-rb25det-engine-rebuild/
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted

Why wouldn't you deck it? It would be at a machinist anyway, and hardly costs anythings to do.

The port matching to gasket is pretty much pointless, typically the gaskets are a reasonable amount larger than the ports, so you would just be doing this

___/\____ (gasket goes between slashes, makes more sense in my head than on the screen)

Hacking shit up and making it worse with a die grinder is easy, improving the flow characteristics of a port is really hard.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

If you are fitting an N1 pump and like to sit on the limiter read at least the last third of this thread:

http://www.skylinesaustralia.com/forums/topic/110680-oil-control-in-rbs-for-circuit-drag-or-drift/?&hl=sk+oil+control

boostn0199 Grand Master

boostn0199

Posted
Posted

Stay with stock pump or if you want just upgrade the gears in them, Im personally still using stock engine stock oil pump with 350kw last 3 years in my drift car and no problems so they can take the abuse.

Billionaire_Project Explorer

Billionaire_Project

Posted
  • Author
Posted

Will only deck the block if it needs it, can't see a reason to just deck it. More with the gasket porting is Exh, oil, water. The rb25 heads flow more then enough for what we require. However one of the engine builders recommend it so that's why I was asking here.

Stock pump was trashed and picked up a new n1 for almost free, still looking at changing gears in them. Definitely fitting a crank collar.

If you are fitting an N1 pump and like to sit on the limiter read at least the last third of this thread:

http://www.skylinesaustralia.com/forums/topic/110680-oil-control-in-rbs-for-circuit-drag-or-drift/?&hl=sk+oil+control

Yeah have spent the last couple of days reading that and plan to do sump vent, restrictors and possibly look at .cam cover baffles

Stay with stock pump or if you want just upgrade the gears in them, Im personally still using stock engine stock oil pump with 350kw last 3 years in my drift car and no problems so they can take the abuse.

Yeah we were thinking of just staying stock, everyone says they are fine at that power but then this is also just ticking the boxes for later, we aren't really doing much headwork yet. That might come later, most probably will.

internal or external gated?

are you planning to stay with 540cc injectors? seems small

Still tossing up going e85 so that will mean complete fuel system change. Also fairly happy to keep 540's in for the run in phase and if it becomes a problem upgrade then. Injectors aren't to bad to change after the fact, it's more bottom end we are focused on ATM.

Internally gated ATM, not sure weather it's worth changing to externally gated, have to do more research.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Still tossing up going e85 so that will mean complete fuel system change. Also fairly happy to keep 540's in for the run in phase and if it becomes a problem upgrade then. Injectors aren't to bad to change after the fact, it's more bottom end we are focused on ATM.

I'm getting 314AWKW at less than 90% duty on 98 petrol from my 550 Deatschwerks so you should be fine for now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • Kinkstaah
      My BMW E39 528i touring

      By Kinkstaah · Posted

      @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...