Jump to content
SAU Community

Recommended Posts

Hi guys I was just wondering if any of you know any tricks to make it harder for people to steel your car. Stuff like disconnecting wires or stuff like that so someone can't just get your keys and go. I have a r32 gtst and I often here if them being stolen and it's a worry.

Link to comment
https://www.sau.com.au/forums/topic/438467-theft-prevention/
Share on other sites

I fitted a Worksbell Quick Release Steering wheel and locking mechanism (in addition to standard alarm etc)

When parked - the wheel is turned to full lock and I take the Steering Wheel off (and with me if required) - then fit the locking hub over the boss.

Should at least discourage the 'joyriders'........

Cheers

The Baron

I got mine from here:

http://www.tunersgroup.com/

There are different bosses for different cars (depending on HICAS/super HICAS etc.) so difficult to give a price for your situation.

I matched mine to a Momo steering wheel as well - all up was about $ 600.

It should be noted that 'strictly speaking' the modification of the steering column in Victoria and replacement with a 'non padded' steering wheel is not legal - but frankly I dont care ;-)

Cheers

The Baron

  • 2 weeks later...

http://www.disklokuk.co.uk/products.html

^this!

had one for a year or two now i live in a dodge area where ive already had one r33 stolen and my brother had his ke70 stolen (luckily he got it back as it was used in a ram raid and dumped) anyway as far as im aware these are the ONLY steering lock in uk to be approved by insurers. now for anyone whos had insurance in the uk they will know this is a big deal as car insurance in the uk is legalised crime. one quote i received when iwas 19 and wanted insurance for a 1.2l renault clio was $16k.......

and no i dont sell these :P

Edited by Nii San

I'd have a word with Chris Rogers, you'll find him in the car audio/security thread. What he doesn't know is not worth knowing.

I agree.

He's about to finish work on my car and then he's taking off to Vic for some lucky sods who managed to pool together to secure his services in making their cars just a wee bit harder to steal.

This car will be the 3rd car of mine he's worked on.

For the record, he's also willing to humor any sort of security idea you might have and he'll shoot you down if it's not worth doing. Fortunately he gave mine the go ahead BUT you better have money ready. Quality work does not come cheap.

Not saying I'm rich but I'd rather spend the money on a good security installation than an exhaust + tune only to lose everything when the car gets taken. An insurance payout isn't exactly the same as your pride and joy is it? ;)

thanks for the replies guys I might look into a GPS tracker so if it does ever get stolen the cops can see exactly where the car is

...for a while until it's stripped or burnt out.

Prevention is better than a gps tracker.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...